Setting The Staple Finisher In The Printer Driver; Printer Settings When Using The Staple Finsher - Epson WF-M21000 Series User Manual

Using Optional Items
No. Optional Item
C
Staple Cartridge
D
Punch Waste Tray

Setting the Staple Finisher in the Printer Driver

The process is the same as for the high capacity tray.
Related Information
"Setting the High Capacity Tray in the Printer Driver" on page 335
&

Printer Settings When Using the Staple Finsher

You need to make settings on the printer to use the Staple Finisher.
❏ When copying
Tap Settings > General Settings > Printer Settings > Output: Copy, and then select Finisher tray.
❏ When faxing
Tap Settings > General Settings > Printer Settings > Output: Fax, and then select Output tray or Finisher
tray.
❏ When printing from a computer, memory device, and so on.
Tap Settings > General Settings > Printer Settings > Output: Other, and then select Finisher tray.
When printing from a computer, you can specify whether or not to use the finisher unit from the Output Tray
menu on the printer driver.
Important:
c
When using the finisher tray, do not remove your printouts while the print job is still in progress. The print position
may be misaligned and the staple position may move from its original position.
> >
Staple Finisher Printer Settings When Using the Staple Finsher
Overview
For flat stitching.
Collects punch hole scraps.
338