Configuring The Lte Mini-Pim; Figure 15: Mounting The Antennas On A Wall - Juniper SRX300 Series User Manual
High memory gateway interface modules reference
Hide thumbs
Also See for SRX300 Series:
- Reference manual (142 pages) ,
- Hardware manual (134 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
SRX300 Series and SRX550 High Memory Gateway Interface Modules Reference
Configuring the LTE Mini-PIM
80
NOTE:
For SRX320 Services Gateways, which can be mounted on a wall,
the antennas can be mounted as shown in
Figure 15: Mounting the Antennas on a Wall
Power on the services gateway.
11.
NOTE:
If a services gateway with factory-default settings is powered on with
the LTE Mini-PIM installed in slot 1, the dialer interface is triggered to dial
automatically. This functionality is applicable only if the Mini-PIM is installed
in slot 1. If the Mini-PIM is installed in any other slot, then you will need to
manually configure the cl-slot-number/0/0 interface to be associated with
the dialer interface.
Figure 15 on page
> 11 in.
(27 .9 cm)
Copyright © 2017, Juniper Networks, Inc.
80.
Advertisement
Chapters
Table of Contents
