Juniper SRX300 Series User Manual page 99

Copyright © 2017, Juniper Networks, Inc.
To configure the Mini-PIM:
Configure the dialer pool:
1.
user@host# set interfaces cl-slot-number/0/0 dialer-options pool number priority
number
Configure the profile:
2.
user@host# request modem wireless create-profile profile-id profile-id
access-point-name l3vpn.corp authentication-method chap sip-user-id user@myvpn.net
sip-password password
Activate the SIM:
3.
user@host# set interfaces cl-slot-number/0/0 act-sim sim-slot-number
Select the profile and configure the radio access type for the SIM card:
4.
user@host# set interfaces cl-slot-number/0/0 cellular-options sim sim-slot-number
profile-id profile-id
user@host# set interfaces cl-slot-number/0/0 cellular-options sim sim-slot-number
radio-access automatic
NOTE: If a SIM card is installed in the second slot, then select the profile
and configure the radio access type for the secondary SIM card as well.
Configure the dialer interface:
5.
Always-on mode:
user@host# set interfaces dl0 unit 0 family inet negotiate-address
user@host# set interfaces dl0 unit 0 family inet6 negotiate-address
user@host# set interfaces dl0 unit 0 dialer-options pool dialer-pool-number
user@host# set interfaces dl0 unit 0 dialer-options dial-string dial-number
user@host# set interfaces dl0 unit 0 dialer-options always-on
Dial-on-demand mode:
user@host# set interfaces dl0 unit 0 family inet negotiate-address
user@host# set interfaces dl0 unit 0 family inet6 negotiate-address
user@host# set interfaces dl0 unit 0 family inet filter dialer dialer-filter-name
user@host# set interfaces dl0 unit 0 dialer-options pool dialer-pool-number
user@host# set interfaces dl0 unit 0 dialer-options dial-string dial-number
Backup mode:
Chapter 11: Configuring Mini-Physical Interface Modules
81