1-Port Vdsl2 Annex A Mini-Physical Interface Module (Srx-Mp-1Vdsl2-R) Hardware Specifications; 1-Port Vdsl2 Annex A Mini-Physical Interface Module (Srx-Mp-1Vdsl2-R); Table 18: 1-Port Vdsl2 Annex A (Srx-Mp-1Vdsl2-R) Mini-Pim Hardware - Juniper SRX300 Series User Manual

SRX300 Series and SRX550 High Memory Gateway Interface Modules Reference
Related
Documentation
1-Port VDSL2 Annex A Mini-Physical Interface Module (SRX-MP-1VDSL2-R) Hardware
Specifications
26
The following features are supported on the 1-Port VDSL2 Annex A Mini-Physical Interface
Module (Mini-PIM):
ADSL/ADSL2/ADSL2+ backward compatibility with Annex-A, Annex-M support
Packet Mode Transfer (PTM) or Ethernet in the First Mile (EFM) (802.3ah) support
Operation, Administration, and Maintenance (OAM) support for ADSL/ADSL2/ADSL2+
mode
Asynchronous Transfer Mode (ATM) quality of service (QoS) (supported only when
the VDSL2 Mini-PIM is operating in ADSL2 mode)
Multilink Point-to-Point Protocol (MLPPP) (supported only when the VDSL2 Mini-PIM
is operating in ADSL2 mode)
Support for a maximum of 10 permanent virtual connections (PVCs) (only in
ADSL/ADSL2/ADSL2+ mode)
Dying Gasp support (ADSL and VDSL2 mode)
1-Port VDSL2 Annex A Mini-Physical Interface Module (SRX-MP-1VDSL2-R) Hardware
Specifications on page 26
1-Port VDSL2 Annex A Mini-Physical Interface Module (SRX-MP-1VDSL2-R) LEDs on
page 27
1-Port VDSL2 Annex A Mini-Physical Interface Module (SRX-MP-1VDSL2-R) Supported
Profiles on page 27
Table 18 on page 26 gives the hardware specifications of the 1-Port VDSL2 Annex A
Mini-Physical Interface Module (Mini-PIM).

Table 18: 1-Port VDSL2 Annex A (SRX-MP-1VDSL2-R) Mini-PIM Hardware

Specifications
Description
Dimensions (H x W x L)
Weight
Connector type
Form factor
Environmental operating temperature
Storage temperature
Value
3.75 in. x 5.9 in. x 0.80 in.
(9.5 cm x 14.5 cm x 2.0 cm)
4.0 oz (114 g)
RJ-11
Mini-PIM
32°F through 113°F (0° C through 40° C)
–40°F through 158°F (–40° C through 70° C)
Copyright © 2017, Juniper Networks, Inc.