Table 29: Lte Mini-Pim Front Panel Components; Table 30: Specifications For The Lte Mini-Pim Antenna - Juniper SRX300 Series User Manual

SRX300 Series and SRX550 High Memory Gateway Interface Modules Reference

Table 29: LTE Mini-PIM Front Panel Components

Component
Antenna connectors
Mini-USB port
SIM slots
LEDs

Table 30: Specifications for the LTE Mini-PIM Antenna

Specification
Part number
Operating frequency range
Voltage Standing Wave Ratio (VSWR)
Impedance
Radiation
Peak gain
Input power
Polarization
Operating temperature
Connector type
Length
40
Description
Two SubMiniature version A (SMA) connectors.
Mini-USB Type-B port for monitoring and troubleshooting.
Two slots, SIM1 and SIM2
and nano SIMs. The mini-SIM can be inserted directly in the SIM slot. To insert micro and nano
SIMs, use the SIM adapters supplied with the Mini-PIM. The Mini-PIM is shipped with two SIM
adapters.
Indicate the status at a glance. For details on the LED indications, see
Interface Module LEDs" on page
The LTE Mini-PIM supports two multi-band swivel-mount dipole antennas, which can
be rotated 360 °. You can rotate the antennas and select the angle at which the signal
strength is high. Table 30 on page 40
The antenna is connected to the services gateway through the magnetic antenna base.
Table 31 on page 41 lists the specifications for the antenna base.
, for inserting the SIM cards. The LTE Mini-PIM supports mini, micro,
42.
lists the specifications for the antenna.
Value
EDA-2010-4G0R2-A2 (Vendor: MAG.LAYERS)
704~960 MHz
1710~2700 MHz
5 (maximum)
50 ohm
Omnidirectional
2.45 dBi (704~960 MHz)
4.51 dBi (1710~2700 MHz)
1 W
Linear, vertical
–4° F (–20° C) to 149° F (65° C)
SMA
203 mm
"LTE Mini-Physical
Copyright © 2017, Juniper Networks, Inc.