Firmware Upgrade On The Lte Mini-Physical Interface Module; Mini-Pim Firmware Upgrade Using The Cli - Juniper SRX300 Series User Manual

SRX300 Series and SRX550 High Memory Gateway Interface Modules Reference
Related
Documentation

Firmware Upgrade on the LTE Mini-Physical Interface Module

Mini-PIM Firmware Upgrade Using the CLI

82
user@host# set interfaces dl0 unit 0 family inet negotiate-address
user@host# set interfaces dl0 unit 0 family inet6 negotiate-address
user@host# set interfaces dl0 unit 0 dialer-options pool dialer-pool-number
user@host# set interfaces dl0 unit 0 dialer-options dial-string dial-number
user@host# set interfaces interface-name unit 0 backup-options interface dl0.0
LTE Mini-Physical Interface Module LEDs on page 42
LTE Mini-Physical Interface Module Hardware Specifications on page 43
Mini-PIM Firmware Upgrade Using the CLI on page 82
Modem Firmware Upgrade Through Over-the-Air (OTA) on page 84
To upgrade the firmware on the Mini-PIM, using the CLI:
NOTE: When you upgrade the firmware on the Mini-PIM, the modem firmware
is also upgraded.
Identify the currently installed firmware version and new firmware version available
1.
for upgrade:
user@host > show system firmware
Part Type
FPC 1
PIC 0 MLTE_FW
Routing Engine 0 RE BIOS
Routing Engine 0 RE BIOS Backup 1
a. If the Available Version
that the device is not running the latest jfirmware. Proceed to Step 2 to download
and upgrade to the latest jfirmware.
b. If the
Available Version
Step 4.
Download the appropriate jfirmware version from
2.
http://www.juniper.net/support/downloads/group/?f=junos
NOTE: Ensure that the jfirmware version is the same as the version of the
Junos OS installed on the device. To know the Junos OS version, issue the
show version
Tag Current
version
1 17.2.91
0 3.2
3.2
field in the output does not list any information, it indicates
field in the output lists the firmware version, proceed to
command.
Available Status
version
OK
3.2 OK
3.2 OK
:
Copyright © 2017, Juniper Networks, Inc.