Figure 12: Installing The Lte Mini-Pim - Juniper SRX300 Series User Manual

SRX300 Series and SRX550 High Memory Gateway Interface Modules Reference
78
CAUTION: Slide the Mini-PIM straight into the slot to avoid damaging the
components on the Mini-PIM.
Slide the Mini-PIM in until it lodges firmly in the services gateway. See
6.
Figure 12 on page 78.

Figure 12: Installing the LTE Mini-PIM

Using a 1/8-in. (3-mm) flat-blade (–) screwdriver, tighten the screws on each side of
7.
the Mini-PIM faceplate.
Remove the cover from the SIM slot,
8.
can use the other slot, SIM 2
Replace the cover over the SIM slots.
9.
Attach the antennas to the antenna base. Connect the cables from each antenna
10.
base to the SMA connectors on the Mini-PIM. See
. Insert the SIM card into the SIM slot. You
SIM 1
, for installing a secondary or backup SIM.
Figure 13 on page
Copyright © 2017, Juniper Networks, Inc.
79.