Leds; 1-Port Vdsl2 Annex A Mini-Physical Interface Module (Srx-Mp-1Vdsl2-R); Supported Profiles; Table 19: 1-Port Vdsl2 Annex A (Srx-Mp-1Vdsl2-R) Mini-Pim Led States - Juniper SRX300 Series User Manual

Related
Documentation
1-Port VDSL2 Annex A Mini-Physical Interface Module (SRX-MP-1VDSL2-R) LEDs
Related
Documentation
1-Port VDSL2 Annex A Mini-Physical Interface Module (SRX-MP-1VDSL2-R) Supported
Profiles
Copyright © 2017, Juniper Networks, Inc.
Table 18: 1-Port VDSL2 Annex A (SRX-MP-1VDSL2-R) Mini-PIM Hardware
Specifications (continued)
Description
Relative humidity
1-Port VDSL2 Annex A Mini-Physical Interface Module (SRX-MP-1VDSL2-R) Overview
on page 25
1-Port VDSL2 Annex A Mini-Physical Interface Module (SRX-MP-1VDSL2-R) Supported
Profiles on page 27
The 1-Port VDSL2 Annex A Mini-Physical Interface Module (Mini-PIM) has two LEDs.
Table 19 on page 27 describes the LED states.

Table 19: 1-Port VDSL2 Annex A (SRX-MP-1VDSL2-R) Mini-PIM LED States

LED Color
SYNC Green
TX/RX Green
1-Port VDSL2 Annex A Mini-Physical Interface Module (SRX-MP-1VDSL2-R) Overview
on page 25
1-Port VDSL2 Annex A Mini-Physical Interface Module (SRX-MP-1VDSL2-R) Hardware
Specifications on page 26
1-Port VDSL2 Annex A Mini-Physical Interface Module (SRX-MP-1VDSL2-R) Supported
Profiles on page 27
A profile is a table that contains a list of preconfigured VDSL2 settings.
Table 20 on page 28 lists the different profiles supported on the 1-Port VDSL2 Annex A
Mini-PIM, along with their data rates.
Chapter 4: 1-Port VDSL2 Annex A Mini-Physical Interface Module
Value
5% to 90% noncondensing
State Description
On Indicates that the VDSL interface is trained.
Blinking Indicates training is in progress.
Blinking Indicates that traffic is passing through.
Off Indicates that no traffic is passing through.
27