Appendix F. Cellular Module Regulatory Information; Important Information For North American Users; Rf Exposure - Campbell CELL200 Series Product Manual

Appendix F. Cellular module
regulatory information
F.1 Important information for North
American users
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to correct the
interference at his own expense.
WARNING:
Changes or modifications to this device not expressly approved by Campbell Scientific could
void the user's authority to operate this equipment.
F.2 RF exposure
In accordance with FCC/IC requirements of human exposure to radio frequency fields, the
radiating element shall be installed such that a minimum separation distance of 20 cm should be
maintained from the antenna and the user's body.
WARNING:
This product is only to be installed by qualified personnel.
To comply with FCC/IC regulations limiting both maximum RF output power and human
exposure to RF radiation, the maximum antenna gain must not exceed the specifications listed in
the following tables for the device used.
CELL200-Series 4G LTE Cellular Module 82