In the Settings Editor > Network Services tab, next to the Trusted Hosts field, click Edit and
Add your trusted IP addresses, one at a time.
14. Click Apply to save the changes. Verify the settings in the summary window.
(Recommended) Save a copy of the settings to a file on the computer. Click OK.
15. Click Disconnect and close Device Configuration Utility.
6.1.3 Set up LoggerNet
The LoggerNet Network Map is configured from the LoggerNet Setup screen.
NOTE:
Setup has two options, EZ (simplified) and Standard. Click on the View menu at the top of the
Setup screen, and select Standard view.
From the LoggerNet toolbar, click Main > Setup and configure the Network Map as described in
the following steps:
1. Select Add Root > IPPort.
2. Select PakBusPort and pbRouter for PakBus data loggers such as the CR6 or CR1000X.
CELL200-Series 4G LTE Cellular
Module 14