Quickstart (Integrated Mode) - Campbell CELL200 Series Product Manual

6. QuickStart (integrated mode)

NOTE:
This QuickStart describes configuring the CELL200 series in integrated mode (mimicking our
internal cell modems) with its default settings. It can also be configured in non integrated or
serial server mode.
This QuickStart section does not apply to CR3000, CR1000 and CR800-series users. See
Overview (p. 8) for more information on the different modes. See
logger configuration (p. 35) for more information on configuring the module in the different
modes.
The Provisioning Report received with your Cellular Data Service shows whether the module was
configured with a private dynamic or public static IP address. See
of a Campbell Scientific Provisioning Report. Other cellular providers should provide similar
information.
Additionally, Campbell Scientific cellular modules configured with a public static IP address will
have two stickers on the module, as shown in
phone number and data plan. The second sticker will show the static IP address.
Campbell Scientific cellular modules configured with a private dynamic IP address will have one
sticker on the module. It will show the module phone number and data plan.
Figure 6-1. Static IP provisioning report
Figure 6-2
CELL200 series and data
Figure 6-1
(p. 11). One sticker will show the module
CELL200-Series 4G LTE Cellular
(p. 10) for an example
Module 10