Test The Connection; Modules Using A Public Static Ip; Set Up Hardware - Campbell CELL200 Series Product Manual

4g lte cellular module

Hide thumbs Also See for CELL200 Series:

Table of Contents

6.1.4 Test the connection

After the Network Map has been configured, test the cellular connection by using the Connect

screen as shown in the following image. Click on the appropriate station and click Connect to

initiate a call to the data logger.

TIP:

The connection time is subject to many external factors. It is often less than 30 seconds but

could be up to 15 minutes. Be patient.

If the connection is successful, the connectors icon at the bottom of the screen will come

together and clock information from the data logger will be displayed in the Station Date/Time

field. If the connection fails, a Communications Failure message will be displayed.

1. Connect the cellular antenna, if it is not already connected. When using a MIMO antenna

with multiple cellular connections, connect the primary cable to Cellular and the secondary

to Diversity. If the cables are not marked in this way, they can be connected to either

antennna port.

CELL200-Series 4G LTE Cellular

Module 18

Table of Contents