Serial Server Mode Option - Campbell CELL200 Series Product Manual

If the connection is successful, the connectors icon at the bottom of the screen will come
together and clock information from the data logger will be displayed in the Station Date/Time
field. If the connection fails, a Communications Failure message will be displayed.

8.4.3 Serial server mode option

In serial server mode, the module receives IP communications over the cellular network and
converts those to serial communications to pass on to the data logger. From the perspective of
the data logger, this is no different than a serial cable connecting it to a computer.
This is the mode used with CR200-Series and Edlog (CR23X, CR10X, and CR510) data loggers, and
cellular-to-RF networks. Only one IP connection at a time is supported.
NOTE:
A public static IP account must be used when the module is set up in serial server mode.
Private dynamic IP accounts do not support the serial server mode.
NOTE:
Instructions in this section assume that you have established cellular service and the SIM card
has been installed as described in QuickStart (integrated
CELL200-Series 4G LTE Cellular
mode) (p. 10).
Module 41