2. Precautions
READ AND UNDERSTAND the
l
An authorized technician shall verify that the installation and use of this product is in
l
accordance with the manufacturer's instructions, recommendations and intended use.
Although the CELL200 series is rugged, it should be handled as a precision instrument.
l
Follow local regulations (see Compliance in
l
Protect from over-voltage.
l
Protect from water.
l
Protect from ESD (electrostatic discharge).
l
3. Initial inspection
Upon receipt of the CELL200 series, inspect the packaging and contents for damage. File
l
any damage claims with the shipping company.
Immediately check package contents. Thoroughly check all packaging material for product
l
that may be concealed. Check model numbers, part numbers, and product descriptions
against the shipping documents. Model or part numbers are found on each product.
Report any discrepancies to Campbell Scientific.
4. Pre-installation
TIP:
Check
www.campbellsci.eu
software and data logger operating system (OS).
Updating the OS during system setup and testing, or on site is recommended. Sending an OS
to a remote data logger will interrupt the data logger program. If you have questions, contact
Campbell Scientific for assistance (https://www.campbellsci.eu/support).
section at the front of this manual.
Safety
Specifications
to ensure you are using the latest data logger support
CELL200-Series 4G LTE Cellular
[p. 24]).
Module 2