4.3 Konect PakBus Router setup
For better security, we recommend using Konect PakBus® Router with a private dynamic IP
address. This method allows only incoming PakBus communications. No other incoming
communications are supported. However, all forms of outbound communications from the data
logger are supported, including but not limited to PakBus, email, and FTP.
4.3.1 Get started
You will need the Konect PakBus Router redemption code that came on a card with the CELL200
series.
Open a web browser and go to
www.konectgds.com
.
First-time users need to create a free account. After you submit your information, you will receive
two emails up to five minutes apart. One email will contain a Passport ID and the other your
Password. If emails are not received, check your email junk folder.
CELL200-Series 4G LTE Cellular
Module 5