Printer Message; Messages; Printer Messages On Aculaser C2000 - Epson ACULASER COLOR 2000 Service Manual

EPSON AcuLaser C2000 / AcuLaser C1000

3.2 Printer Message

The messages of AcuLaser C2000 / AcuLaser C1000 are categorized into the
following 4 types:
Status
Indicates the printer status.
Status message is indicated only when no error occurred or during the
initialization.
Error
Indicates the error status.
Warning
Indicates the warning status. Print job is not halted.
Service call error
Indicates errors that requires service call.
Troubleshooting

3.2.1 Messages

3.2.1.1 Printer Messages on AcuLaser C2000

A list of printer messages of AcuLaser C2000 is shown below. Each message
is the message when "Lang = English" is set.
As for warning messages, by pressing the Continue switch, the lower order
warning messages are displayed in their order.
If the LED message is new for this product, it marked as new at the right end
column.
See the following tables for the list of this printer's printer message.
Table 3-4. Messages (AcuLaser C2000)
LED Message
(Display when Power is Turned On)
Service Req Cffff
Service Req Efff
ROM CHECK
RAM CHECK
HDD CHECK
Self Test
Reset All
Reset
Check Duplex P-Size
Check Media Type
Jam x x x x
(x=A,B,C1,C2,DM)
uuuu Toner Crtg Out
(uuuu=CMYK, only the relevant item is
displayed.)
Printer Message
Revision E
Status
Category
code
Status
Service Call Error 6000
Service Call Error *1 6001 - 6999
Status
Status
Status
Status
Status 1004
Status 1004
Error 4016
Error 4226
Error*2 4008,4009,4
017,4012
Error 4049 - 4063
108