Revision
Issued Date
A
June 8, 2000
B
July 26, 2000
C
September 19, 2000
D
February 27, 2001
E
October 10, 2001
Revision Status
First Release
Chap. 3:On page 107, Figure 3-1 "Print Pattern" has been changed.
Chap. 4:On page 145, 4.2.3.6 "Rear Controller Cover Removal"
has been changed.
On page 148, 4.2.4 "C314MAIN Board" has been changed.
1.4.6 Engine Program Update is deleted.
4.3 MCU Firmware Update is deleted.
This function is not supported for mass-production.
3.2.4.1 Engine Related Service Call Error Messages
E021 is added: Transfer Belt Cleaner gap control malfunction
E020 and E032: Explanation is corrected: retraction -> gap control
A new model AcuLaser C1000 has been added.
In connection with the addition of the new model, the contents of this
manual were reviewed in the chapters PRODUCT DESCRIPTIONS,
OPERATING PRINCIPLES, TROUBLESHOOTING, DISASSEMBLY &
ASSEMBLY, ADJUSTMENT and APPENDIX.
Description