Epson ACULASER COLOR 2000 Service Manual page 74

EPSON AcuLaser C2000 / AcuLaser C1000
Unit Detection Item Detection Method
OPC Exist / non-exist Contact point
detection conductivity check
method
New / old Fuse method
detection
Installation and Contact point
removal conductivity check
detection at method
power supply
ON
Used amount Measures the driving
detection period (motor rotational
period)
Near end Main motor driving time
detection accumulated period
End detection Main motor driving time
accumulated period
EPSON genuine Non-compatible rib
product
detection
Operating Principles
Note
Fusing oil
roller
• It can be installed and
removed with the
conductivity on.
• No mechanism
broken.
• The installation and
removal state is
updated at cover open
/ close.
Calculated by 30
seconds interval.
2640 count x 30 seconds
=1320 min.
3300 count x 30 seconds
= 1650 min.
After end detection, print
less than 100 images
(300 seconds) and stops Waste
after printing. toner box
Cannot be installed
structurally.
Mechanism Overview
Unit Detection Item Detection Method
Exist / non-exist Contact point
detection conductivity check
method
Installation and Contact point
removal conductivity check
detection at method
power supply
ON
New / old Fuse method
detection
Used amount Measures the driving
detection period (fusing motor
rotational period) TBD
End detection Measures the driving
period (fusing motor
rotational period) TBD
EPSON genuine Measures the driving
product period (fusing motor
detection rotational period) TBD
Exist / non-exist Leaf switch
detection
Installation and Leaf switch
removal
detection at
power supply
ON
Near full Photo sensor
detection
Revision E
Note
• It can be installed and
removed with the
conductivity on.
• No mechanism
broken.
• The installation and
removal state is
updated at cover open
/ close.
• It can be installed and
removed with the
conductivity on.
• No mechanism
broken.
• The installation and
removal state is
updated at cover open
/ close.
Stop printing when
printing 200 images
(average image
occupied area 20%) after
near full is detected.)
74