3.10
How to Change the Display Color for Sensor
Data Based on Integrity
The following procedure shows how to change the color of the data in the sensor in-
formation box based on the results of the Integrity Check. For the Integrity Check, see
the Operator's Manual for the Chart Radar.
1. In the chart mode, press Ctrl, Shift and t keys simultaneously on the control unit
or keyboard. A dialog box for entry of password appears.
2. Enter the password and click the [OK] button.
Note: The edit mode remains enabled until you press Ctrl, Shift and t keys simul-
taneously or reboot the unit.
3. Click [MENU] to open the menu.
4. Click [Ship & Route Parameters], then click the [Function2] tab.
5. Check the checkbox of [Show status regarding own ship information in menu win-
dow.].
6. Click the [Save] button to save the configuration.
3.11
How to display the [Echo] page
To overlay the radar image on the chart mode, display the [Echo] page in the [Overlay/
NAV Tools] box. For details, see the Operator's Manual for the Chart Radar.
Note 1: For B-type radar, the [Echo] page is not available regardless of this setting.
Note 2: In radar mode, set the radar to transmit to show the radar image on the chart
mode.
1. In the chart mode, press Ctrl, Shift and t keys simultaneously on the control unit
or keyboard. A dialog box for entry of password appears.
2. Enter the password and click the [OK] button.
Note: The edit mode remains enabled until you press Ctrl, Shift and t keys simul-
taneously or reboot the unit.
3. Click [MENU] to open the menu.
3. SETTINGS AND ADJUSTMENTS
3-15