Table of Contents
Advertisement
3. SETTINGS AND ADJUSTMENTS
Detailed meaning of setting value
Each of the ones place digit, tens place digit, hundreds place digit and thousands
place digit have meanings.
(1) The ones place digit indicates the boundary of the pulse length that turns off the
IR of the TT front end.
For example, to set "pulse length M2 - L, IR OFF", set the ones digit to "3". (The
default setting for the ones digit is "6", which turns off IR no matter the pulse length.)
(2) The tens place has the meaning shown in the table below.
(3) The hundreds and thousands places indicate the boundary value of the antenna
rotation speed (rpm) that turns off IR.
The table shows preset values and their content.
3.4
How to Input Navigation Data
Because navigation data is not automatically input to the EC-3000, it is necessary to
enter the mode as type=B, and enter heading, speed and position manually.
The operator can select navigation sensors to use for navigation and view their current
values on the applicable page in the [System Sensor Setting] and [Local Sensor Set-
ting] menus. To access these menus, right-click the Sensor information datum box,
then click [Select Sensor] followed by [Setting].
The descriptions in this section show the sensor menus in the radar mode. The sensor
menus in the chart mode mirror those in the radar mode, although the layout is differ-
ent. Any change made in a sensor menu is reflected to the companion sensor menu,
to synchronize the data between the modes.
3-4
Pulse length
S1
S2
M1
M2
M3
L
Setting
0
IR always ON.
1
ACE ON: IR is turned OFF according to pulse length and
antenna rpm.
2
ACE OFF: IR is turned OFF according to pulse length and
antenna rpm.
3
IR always OFF.
Setting
3614
Antenna rotation 36 rpm, ACE ON, IR is turned off when
pulse length is M3 - L.
3604
Tens place is "0", which means IR is always ON. IR is al-
ways ON regardless of value of ones place, one hundreds
place and or thousands place.
3634
Tens place is "3", which means IR is always OFF. IR is al-
ways OFF regardless of value of ones place, one hun-
dreds place or one thousands place.
Setting
0
1
2
3
4
5
Content
Content
Advertisement
Table of Contents
