Furuno FAR-3210 Installation Manual page 160

APPX. 4 ALERT LIST
Alert ID
ALF ALR
3015, 13 775
3015, 14 781
3015, 15 783
3015, 16 784
3015, 21 170
3015, 22 272
3015, 23 277
3015, 24 279
3015, 25 284
3015, 26 450
AP-22
Alert title
Lost HPA Execute the self test
Meaning: There is a problem with the HPA board in the radar antenna.
Remedy: For detailed information, conduct a [Self Test].
Lost MTR-DRV Execute the self test
COM
Meaning: There is a problem communicating with the SPU board in the radar an-
tenna.
Remedy: Check connections between the radar antenna and the processor unit.
If the problem appears to be caused by the radar antenna, contact your local
dealer for service.
Lost RF-CONV Execute the self test
COM
Meaning: There is a problem communicating with the RF-Converter board in the
radar antenna.
Remedy: Check connections between the radar antenna and the processor unit.
If the problem appears to be caused by the radar antenna, contact your local
dealer for service.
Lost PSU COM Check connection with PSU-Control
Meaning: There is a problem communicating with PSU-Control board in the pow-
er supply unit.
Remedy: For detailed information, conduct a [Self Test].
Lost Position Check position sensor status
Meaning: All position data has been lost for more than 30 seconds.
Remedy: Check the connection with GPS sensors and sensor status.
Lost UTC Signal Check position sensor status
Meaning: Time data of all available GPS sensor has been not available for more
than 3 seconds.
Remedy: Check the connection with GPS sensors and sensor status.
Lost Wind Signal Check wind sensor or sensor status
Meaning: Wind speed/direction data of all available WIND sensors has been not
available for more than 3 seconds.
Remedy: Check the connection with wind sensors and sensor status.
Lost COG/SOG Check position sensor status
SIG
Meaning: COG/SOG data of all available GPS sensor has been not available for
more than 3 seconds.
Remedy: Check the connection with GPS sensors and sensor status.
Lost LOG(BT) Check speed sensor or sensor status
SIG
Meaning: SOG data of all available LOG (ground speed) sensors has been not
available for more than 3 seconds.
Remedy: Check the connection with LOG sensors and sensor status.
Lost Heading Check heading sensor or sensor status
SIG
Meaning: Heading data of all available heading sensor has been not available
for more than 2 seconds.
Remedy: Check the connection with heading sensors and sensor status.
Alert Message
Priority &
Category
Warning
Cat: B
Warning
Cat: B
Warning
Cat: B
Warning
Cat: B
Warning
Cat: B
Warning
Cat: B
Warning
Cat: B
Warning
Cat: B
Warning
Cat: B
Warning
Cat: B