Startup The Data Processing Unit; Shut Down The Radar System; Reboot Spu - Furuno WR2120 Operator's Manual

1.2. Startup the Data Processing Unit

(2)
(1)
DC power cord
AC power cord
Power switch
button
(1)
(3)

1.3. Shut down the Radar System

1) Press the power switch of Signal Processing Unit directly to turn off the system.
Confirm a lamp inside the PXI (inside the Signal Processing Unit).
If it turned to red, it means the PXI is down.
2) Shut down the breaker in the SPU.

1.4. Reboot SPU

1) Press the power switch of Signal Processing Unit directly to turn off the
system. Confirm a lamp inside the PXI (inside the Signal Processing Unit).
If it turned to red, it means the PXI is down.
2) Wait for 1 minute and then press the power button again to turn the
power on.
(4)
(6)
(3)
(5)
(4) (6)
(5)
1. Cable connection
(1) Connect DC power cord of DPU-PS to
DPU.
(2) Connect AC power cord to DPU-PS and
AC power cable to electrical outlet.
(3) Connect DVI cable from LCD monitor to
DPU. Also connect the power cord from
LCD monitor to a local power outlet.
(4) Connect LAN cable from LAN port 1 of PXI
(in SPU) to DPU LAN port 1.
Connect USB/LAN adapter that LAN side
(5)
is from MONI-CON (inside the ATU). Other
USB ports are using for keyboard, mouse,
and external HDD.
(6) Connect LAN cable from router to LAN port
2 for using Internet. The router and the
LAN cable for Internet is local supply.
2. Startup DPU
1) DPU will boot up automatically when plugged
in the power cord of DPU-PS to the local
outlet [Default setting].
2) Enter the user name and password if DPU is
asking for login (Refer to section 2)
Power switch
2
Breaker