Furuno FAR-3210 Operator's Manual
Chart radar
Hide thumbs
Also See for FAR-3210:
- Operator's manual (463 pages) ,
- Installation manual (245 pages) ,
- Instruction manual (99 pages)
Table of Contents
Advertisement
Quick Links
CHART RADAR
Model
English
Radar Controls
BRILL
Rotate: Adjusts the
brilliance of a FURUNO
monitor.
Push: Selects a color
A/C RAIN
palette.
Rotate: Suppresses rain clutter.
Push: Toggles between manual
and automatic rain clutter
adjustment.
Rotary control for EBL
Adjusts the active EBL.
EBL1, EBL2
Activates or deactivates the respective EBL.
ALARM ACK
Acknowledges alerts; silences the
audio alarm.
See the next page.
InstantAccess knob
Selects the buttons on the
InstantAccess bar.
ESC
Goes back one step in current
operating sequence on the
InstantAccess bar.
(Product Name: MARINE RADAR)
FAR-3210/3220/3230S/3230S-SSD/3310/3320/3330S/
3330S-SSD/3320W/3330SW/3210-BB/3220-BB/
3230S-BB/3230S-SSD-BB/3220W-BB/3230SW-BB
GAIN
Adjusts the
sensitivity of the
radar receiver.
A/C SEA
Rotate: Suppresses sea clutter.
Push: Toggles between manual
and automatic sea clutter
adjustment.
UNDO
Undoes edit or text input
when creating a radar
map, route, user chart.
RANGE
Selects radar range (radar
and chart radar modes),
chart scale (chart mode).
Operator's Guide
Rotary control for VRM
VRM1, VRM2
Activates or deactivates the respective VRM.
Status LED
The color and state of the LED change
according to system or alert status.
VIEW/HIDE
Radar mode, chart radar mode:
Shows or hides AZ box, Drop mark
boxes, Mark box, PI line box, Trial
box.
Chart mode: Shows or hides EBLs,
InstantAccess bar, [Overlay/NAV
Tools] box, [Route information] box,
VRMs.
1
The purpose of this guide is to provide the
basic operation for this equipment. For more
detailed information, see the Operator's Manual.
All brand and product names are trademarks,
registered trademarks or service marks of their
respective holders.
Adjusts the diameter of the active VRM.
Power switch
Turns the system on or off.
(This switch does control
monitor on/off.)
USB port (under cover)
For connection of USB flash drive.
Trackball module
Operates similar to a PC mouse.
ACQ/ACT
TT: Acquires cursor-selected target, for target
tracking.
AIS: Activates cursor-selected sleeping AIS
target.
TARGET DATA
Displays the detailed data for selected TT, AIS
target, in the TT/AIS information box.
TARGET CANCEL
TT: Stops tracking cursor-selected tracked
target.
AIS: Sleeps cursor-selected activated AIS target.
Long-press to erase all displayed TT target data.
Advertisement
Table of Contents
Related Manuals for Furuno FAR-3210
Summary of Contents for Furuno FAR-3210
- Page 1 Adjusts the diameter of the active VRM. GAIN BRILL Adjusts the VRM1, VRM2 Rotate: Adjusts the Activates or deactivates the respective VRM. sensitivity of the brilliance of a FURUNO radar receiver. monitor. Status LED Push: Selects a color A/C RAIN A/C SEA Power switch palette.
- Page 2 Radar Controls (con’t.) VECTOR TIME VECTOR Sets the vector time (length) for TT and AIS targets. TIME VECTOR MODE VECTOR Sets the vector mode (relative, true) for TT and AIS targets. MODE TARGET LIST TARGET Displays AIS, TT data in the target list. LIST HL OFF STBY/TX...
-
Page 3: Radar Display Indications
Radar Display Indications Cursor position box Sensor information, datum box This box shows Shows your ship's heading, heading source, ship's speed, water tracking speed, - Latitude and longitude of the speed source, course over ground, speed over ground, course and speed source, cursor position. - Page 4 Radar Display Indications (con’t) EBL1 Heading line Bearing scale Message Measures the bearing to a target. Indicates ship's heading. The bearing scale provides an estimate of area the bearing to a target. VRM1 Measures the range to a target. NAV data Route 1 Route 2 Depth :...
-
Page 5: Status Bar
Status Bar (radar, chart radar mode) Antenna Operating mode Selects an antenna. Selects a mode: radar or chart for radar. Chart database Selects the IMO chart database (base, primary, standard or all). STBY TX Available in the chart radar mode. Toggles the radar between stand-by and transmit. - Page 6 Temporarily erases everything reset BRILL course-up and true motion but radar echoes. Adjusts the brilliance of a FURUNO monitor. modes. OWN AIS Enters a MOB mark at the current position. Shows the [VOYAGE DATA] menu, to set your ship’s AIS data.
-
Page 7: Ais Operations
Symbol Name activated target's course and speed are shown with a vector. Sleeping AIS target You can easily judge target movement by monitoring the vector. (green) FURUNO Activated AIS target Vector Click the AIS (green) target symbol. Association AIS target... - Page 8 TT/AIS The TT/AIS setting box shows or hides the TT and AIS displays, and sets the CPA/TCPA alarm, the past position display, vector time and reference, etc. Click to set association criteria (with arrow). <: AIS symbol used for association target. >: TT symbol used for association target.
- Page 9 Chart Display Layout Status bar (see page 10) InstantAccess bar Chart scale, presentation mode box Cursor position box (see page 11) Sensor information box Upper section Own ship functions box Route information box Overlay/NAV Tools box 0.9 m Lower section 341.2°...
- Page 10 Status Bar (chart for radar mode) OTHERS Sets system in standby. PLAN Selects the Voyage planning mode. CHARTS Goes to the Chart maintenance mode. NAVI Selects the Voyage navigation mode. Operating mode Selects the operating mode: RADAR or CHART for RADAR. How to open a drop-down list Indicates a drop-down list.
-
Page 11: Instant Access Bar
Reconverts outdated SENC charts to the Selects a color palette. corresponding current ones. Voyage planning mode Adjusts the brilliance of a FURUNO monitor. Report: See reports on waypoints and voyage planning related routes MOB: Route: Creates a route (see page 12). - Page 12 Routes How to create a route WPT5 At last waypoint, Click a position 161.4° right-click and to mark a waypoint. 353.3NM select [Finish]. Delete WPT Finish WPT6 Plan PLAN Route -ning WPT1 WPT1 WPT4 201.5° 309.0° 2137.2NM 971.4NM Click [New]. WPT2 106.9°...
- Page 13 Routes (con’t.) How to select a route to navigate MANUAL MANUAL To stop navigating a route: Right-click Route32 15 Nov 2013 Route32 15 Nov 2013 [Route]. Select Route AAAAAA 15 Nov 2013 AAAAAA 15 Nov 2013 Route NAVI Route67 13 Nov 2013 13 Nov 2013 Route67 Route selected.
-
Page 14: User Charts
User Charts How to create a user chart Plan User PLAN -ning Chart Click [New]. Click object to draw. How to create a line How to create a circle How to create an area (1) Click (3) Click (2) Click (3) Click Area Tidal:... - Page 15 User Charts (con’t) How to select objects to display in user chart How to link a user chart to a route Route32 15 Nov 2013 AAAAAA 15 Nov 2013 Symbol Route67 13 Nov 2013 DISP Plan Route selected. DISP PLAN Route -ning Click [Select].
- Page 16 Chart Operations How to control visibility of chart objects Basic Setting Control basic chart settings Chart DISP DISP Control chart objects Symbol DISP Control navigational features...
- Page 17 Chart Operations How to set safety contours and chart alerts How to set Display date and Approved until dates Chart Chart Viewing DISP Alert INFO Dates Click [Approve All]. Set safety Click to select chart alert type: contours here. Red ( ): Audio+visual indications Orange ( ): Visual indication Yellow ( ): No indication How to find chart object information (ENC chart)
- Page 18 TT/AIS Operations How to find target info Click a target to show its information. Title bar Title bar Click to switch level of detail TT No. Scroll buttons MMSI Scroll buttons Vessel name AIS symbols (main) TT symbols (main) Bearing Bearing Heading Symbol...
- Page 19 TT/AIS Operations (con’t) Open the chart menu, select TT/AIS Setting and then Setting.1 or Setting.2 as appropriate. AIS filter, how to sleep all AIS targets, auto activation of AIS targets by CPA AIS filter, auto activation of AIS targets by CPA Filters AIS targets by target category.
- Page 20 PUB. NO. OSE-36160-A (1404, YOTA) FAR-3000SERIES 00017802910...