Startup The Display Unit - Furuno WR-2100 Operator's Manual

1.2. Startup the Display Unit

1) Connect AC power supply cord from
electrical outlet to DPU, and turn ON the
power. (Turn ON the power of SPU before
turn ON the power of DPU)
2) Connect LAN cable from SPU to DPU, and
setup IP address for SPU. (192.168.1.101)
3) Connect LAN cable from modem to USB
LAN adaptor for DPU if it does not have 2
ports for LAN, and setup IP address for
Internet. (e.g.: 192.168.0.5)
4) Turn on the power of the Display Unit.
Username: radar
Password: radar
5) The display software starts automatically.
6) Click [Connect] to start radar operation.
7) Click the [Start emission] to start observation and to
display radar images.
Figure 1: DPU
2
SSE-14-0022_17
3 2 1