Furuno FAR-3210 Instruction Manual
  1. Manuals
  2. Brands
  3. Furuno Manuals
  4. Radar
  5. FAR-3210
  6. Instruction manual

Furuno FAR-3210 Instruction Manual

Setting and adjustment
Hide thumbs Also See for FAR-3210:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual , Installation Manual
INSTRUCTION MANUAL
SETTING AND ADJUSTMENTS
FAR-3210/FAR-3220/FAR-3310/FAR-3320/
Model
FAR-3230S/FAR-3330S/FAR-3320W/FAR-3330SW/
FAR-3230S-SSD/FAR-3330S-SSD/
FAR-3210-BB/FAR-3220-BB/
FAR-3230S-BB/FAR-3230S-SSD-BB/
FAR-3220W-BB/FAR-3230SW-BB
This manual is solely for use by the installer. Under no circumstances
shall this manual be released to the user.
The installer shall remove this manual from the vessel after installation.
This manual contains no password data. Obtain password data from
FURUNO before beginning the installation.
www.furuno.com

Advertisement

Table of Contents
loading

Related Manuals for Furuno FAR-3210

Summary of Contents for Furuno FAR-3210

  • Page 1 This manual is solely for use by the installer. Under no circumstances shall this manual be released to the user. The installer shall remove this manual from the vessel after installation. This manual contains no password data. Obtain password data from FURUNO before beginning the installation. www.furuno.com...
  • Page 2 Pub. No. E32-01305-J (1907, GREG) FAR-3000 SERIES Printed in Japan...
  • Page 3 INTRODUCTION About this manual This manual shows how to setup the chart radar after the installation. After setting, make a backup copy of configuration data onto a medium (PC, etc.). Preparation ® ® • PC (for the LAN connection, OS: Windows XP or Windows •...

  • Page 4: Table Of Contents

    TABLE OF CONTENTS INITIAL SETTING AND ADJUSTMENT ..............1-1 1.1 How to Access the Common Installation Settings Menu..........1-1 1.1.1 Laptop PC (LAN connection) access ............. 1-1 1.1.2 Control Unit RCU-024/025/026 ..............1-2 1.1.3 [Common Installation Setting] menu contents..........1-3 1.2 [Basic Setting] Menu ....................1-4 1.2.1 [Basic Setting] window ...................
  • Page 5 TABLE OF CONTENTS 1.15 [Conning] Menu ......................1-56 1.15.1 How to select the data source ..............1-57 1.15.2 Advanced settings window ................1-57 SETTING FOR SENSOR ADAPTER..............2-1 2.1 How to Set the Equipment ID ..................2-1 2.2 How to Save the Log File ...................2-2 2.3 How to Update the Firmware (MC-3000S) ..............2-2 2.3.1 How to activate the maintenance program .............2-3...
  • Page 6 TABLE OF CONTENTS This page is intentionally left blank.

  • Page 7: Initial Setting And Adjustment

    INITIAL SETTING AND ADJUSTMENT This chapter shows you how to enter the initial settings for the processor unit (EC- 3000) of chart radar after the installation. Each unit has a default IP address. Enter the initial settings (Equipment ID setting) and change the IP address on the [Basic Setting] menu (see section 1.2.), before connect- ing each unit and building the network.

  • Page 8: Control Unit Rcu-024/025/026

    1. INITIAL SETTING AND ADJUSTMENT 2. Connect the PC to the LAN1 or LAN2 port of the processor unit with a LAN cable. Note: It is possible to connect to the LAN1 or LAN2 port via a LAN hub. However, to operate from the [Basic Setting] menu, turn off all units except the unit to be set.

  • Page 9: Common Installation Setting] Menu Contents

    1. INITIAL SETTING AND ADJUSTMENT For RCU-025/026: Use the software keyboard on the display to enter the pass- word. 5. Click [SERVICE MODE] on the status bar, and then select [Common Installation Setting]. The message shown below appears. 6. Click [OK] to activate the web browser and show the dialog box asking for ID and password.

  • Page 10: Basic Setting] Menu

    1. INITIAL SETTING AND ADJUSTMENT Basic Setting Basic Setting Own Ship Setting Own Ship Setting Installation Parameters Installation Parameters CCRS Click Click Own Ship Setting Own Ship Setting Installation Parameters Installation Parameters CCRS Alert Define List Alert Define List Tab name Feature Basic Setting Sets the Equipment ID, monitor, printer, and own ship information...
  • Page 11 Setting range: [RAS001] (default setting), [RAS002], [RAS003], [RAS004]. Do not use [RAS005] to [RAS010]. 6. Select [FAR-3xx0 MAG] or [FAR-3xx0 SSD] from the [Equipment Type No.] pull- down list. Radar model Equipment Type No. FAR-3210/3210-BB/3310 [FAR-3xx0 MAG] FAR-3220/3220-BB/3320 FAR-3230S/3230S-BB/3330S FAR-3220W-BB/3320W FAR-3230SW-BB/3330SW...

  • Page 12: Peripherals] Window

    1. INITIAL SETTING AND ADJUSTMENT 1.2.2 [Peripherals] window 1. Access the [Common Installation Setting] menu and click [Basic Setting] on the tab bar. 2. Click [Peripherals] on the menu bar. *1 Not used. *2 Shown when Connected is selected in Connection of [Service Gateway]. 3.
  • Page 13 1. INITIAL SETTING AND ADJUSTMENT Note 2: If the MU-201, MU-231CE or the monitor of Hatteland Display is connect- ed, the optional cable DSUB9P-X2-A-L5M/L10M for brilliance control is required to connect. 4. Select the monitor type and resolution connected to the DVI3 port from the [Type Number] pull-down list of DVI3.

  • Page 14: Vdr] Window

    1. INITIAL SETTING AND ADJUSTMENT Setting option Remarks [HP Officejet 100 Mobile] Connect the printer to the USB port of the processor unit. [HP Officejet 200 Mobile] Note 1: For no printer, set [Printer Model] to [HP Officejet 100 Mobile]. Note 2: The printer HP Officejet Pro 8000 Enterprise Printer can not be connected to the processor unit.

  • Page 15: Route Transfer] Window

    1. INITIAL SETTING AND ADJUSTMENT 3. To connect a VDR, select [Connected] at [Connection] in [VDR] then set each items shown in the table below. Menu item/ Description interactive field [Monitor] Select the DVI port connected with the VDR. [Transmit per 15 sec.] Set the number of transmissions in 15 seconds.

  • Page 16: Application] Window

    1. INITIAL SETTING AND ADJUSTMENT 1.2.5 [Application] window 1. Access the [Common Installation Setting] menu and click [Basic Setting] on the tab bar. 2. Click [Application] on the menu bar. 3. Select the primary display mode from the [Primary] pull-down list. The primary dis- play mode is displayed when you start the ECDIS.

  • Page 17: Ecdis/Radar] Window

    When the checkbox is checked, the TT whose ID is “100” is output with the ID “0”. This checkbox is used only when needed. For example, the checkbox may be checked when a non-Furuno ECDIS is connected. 1.2.8 [Language] window The menu language for the everyday operating screens can be set to English or Jap- anese.

  • Page 18: Own Ship Setting] Menu

    1. INITIAL SETTING AND ADJUSTMENT [Own Ship Setting] Menu Enter the information for ship parameters/CCRP, antenna unit, GPS sensor, AIS tran- sponder, echo sounder (E/S), and SDME sensor. As for the symbol for sensors, there are six colors to show the priority: white (CCRP), cyan (radar), green (GPS), magenta (AIS), orange (E/S) and blue (SDME) in that order.
  • Page 19 1. INITIAL SETTING AND ADJUSTMENT 3. Click [Radar Antenna] on the menu bar. Note: When you set the value for [Antenna Position] on the [Installation Parame- ters] menu, the setting value is shown at the right of [Equipment ID]. 4. According to the number of antenna units connected to the processor unit, check applicable checkbox to activate the antenna unit(s).

  • Page 20: Installation Parameters] Menu

    1. INITIAL SETTING AND ADJUSTMENT [Installation Parameters] Menu The [Installation Parameters] menu sets the signals and input data of the sensors. First, select the sensor data at the [Sensor Setting] window. Then select the sensor from which the units (radar sensor (antenna unit), MFD, ECDIS, radar, chart radar, and sensor adapter) obtain the sensor data.
  • Page 21 1. INITIAL SETTING AND ADJUSTMENT Item Remarks [Sensor Name] Enter the appropriate sensor name. [Manufacture] Select the manufacturer of sensor from the pull-down list. Note: If the required manufacturer does not appear, add it manually (see section 1.4.10). [Sensor Type Select the type of sensor from the pull-down list.

  • Page 22: Processor Unit Configuration

    1. INITIAL SETTING AND ADJUSTMENT Note 3: When connected to a wave analysis PC, set up the wave analyzer as fol- lows: Sensor Sensor name Equipment ID SFID Other Sensor No.1 Wave Analyzer OTR005 RA1001 7. To save the configuration, perform a consistency check, then save the configura- tion data on the [Save and Sync] menu.
  • Page 23 1. INITIAL SETTING AND ADJUSTMENT Item Remarks [System Alert ID] The identification number that is assigned in the system is shown in this field. Do not change the setting. [Alert Information Source] Set the source of alert definition to show on the display when the alert message is received in an ALF sentence.
  • Page 24 1. INITIAL SETTING AND ADJUSTMENT 6. Set the items referring to the following table. Item Remarks [Equipment ID] Select the Equipment ID from the pull-down list. The pull-down list options depend on the setting at [Sensor Set- ting]. [Details] Sets the serial communication for- || Details Setting mat.
  • Page 25 1. INITIAL SETTING AND ADJUSTMENT Item Remarks [Output] Sets the output sentence for- mats from the serial port. • [Output sentence whose destination corresponds with this sensor.]: Check the checkbox to activate any of the following items. • To output the ACK and HBT sentences in re- sponse to the ALR sen- tence from the external...
  • Page 26 1. INITIAL SETTING AND ADJUSTMENT Pin No. Direction Channel No. Contact Status 5, 6 Output Channel 01 Normal Close 7, 8 Output Channel 02 Normal Close 9, 10 Output Channel 03 Normal Open 11, 12 Output Channel 04 Normal Open 15, 16 or 14, 15 Input Channel 01...
  • Page 27 1. INITIAL SETTING AND ADJUSTMENT 10. Click [Digital Output] of [No.1 Chart Radar] on the menu bar. For the pin no. of J11 on the I/O board of the processor unit and the corresponding input/output channel no., see the table on step 7. 11.

  • Page 28: Activating The Connection With The Processor Unit Of The Far-2Xx8 Series Radar

    1. INITIAL SETTING AND ADJUSTMENT Item Remarks [Equipment ID] Select the Equipment ID from the pull-down list. The pull-down list options change according to the setting at [Sensor Setting]. [Details] • [Name]: Enter the appropriate sensor name. • [Data Type]: Set the contact output.
  • Page 29 1. INITIAL SETTING AND ADJUSTMENT 3. Click the [Details] button to set the following items, referring to the table shown be- low. Item Remarks [Equipment Name] Enter the name of the equipment. [Equipment Type] Shows the equipment type number. [SFID] Keep the default settings.

  • Page 30: Sensor Adapter Configuration

    1. INITIAL SETTING AND ADJUSTMENT 1.4.4 Sensor adapter configuration A maximum of eight sensor adapter MC-3000S can be connected to the sensor net- work. In case of the redundant configuration, sixteen sensor adapters can be connect- ed to the network. The MC-3000S can connect a max. ten additional units (MC-3010A/ 3020D/MC-3030D).
  • Page 31 1. INITIAL SETTING AND ADJUSTMENT Connector No. Serial Port No. Connector No. Serial Port No. Serial 01 Serial 05 Serial 02 Serial 06 Serial 03 Serial 07 Serial 04 Serial 08 6. Set the items referring to section 1.4.2. 7. Click [Digital Input] on the menu bar. [Channel 01-01] to [Channel 01-08] are shown on the display.
  • Page 32 1. INITIAL SETTING AND ADJUSTMENT 9. Click [Digital Output] on the menu bar. [Channel 01-01] to [Channel 10-08] are shown on the display. Each sensor adapt- er MC-3030D has eight input ports. When one sensor adapter MC-3030D is con- nected to the MC-3000S, [Channel 01-01] to [Channel 01-08] can be used. When ten sensor adapters MC-3030D are connected, [Channel 01-01] to [Channel 10- 08] can be used.

  • Page 33: Antenna Unit Configuration

    1. INITIAL SETTING AND ADJUSTMENT No.1 MC-3010A No.2 MC-3010A Connector No. Channel No. Connector No. Channel No. Channel 01 Channel 04 Channel 02 Channel 05 Channel 03 Channel 06 12. Check the checkbox for [Channel No.] to set the items referring to the table shown below.

  • Page 34: Monitoring Of Hub

    1. INITIAL SETTING AND ADJUSTMENT 4. Set the appropriate antenna position from the [Antenna Position] pull-down list. The interswitch function requires correct input of the antenna position. Select the appropriate position. 5. Click the [OK] button. 6. To save the configuration, perform a consistency check, then save the configura- tion data on the [Save and Sync] menu.

  • Page 35: Signal And Port Settings For External Equipment

    1. INITIAL SETTING AND ADJUSTMENT 4. Click the [Details] button to open the [Details Setting] window and enter the appro- priate items. • [Equipment Name]: Enter the name of the HUB. • [IP Address]: Select the network and IP Address of the HUB from the pull-down list. •...
  • Page 36 1. INITIAL SETTING AND ADJUSTMENT 4. Click [HUB Port Setting] on the menu bar. The alert settings of each port of HUBs are shown. The settings can be changed, referring to the table shown below. Item Remarks Checkbox Check the checkbox for the port which generates the alert when the connection is interrupted.

  • Page 37: Customized Sensor Setting

    1. INITIAL SETTING AND ADJUSTMENT 1.4.8 Customized sensor setting Set the sensor types and manufacturers in the [Sensor Setting] menu. 1. Click [User Sensor Model List] on the menu bar. 2. Click the appropriate sensor to edit. The figure below shows an example where the [GPS Sensor] is selected.

  • Page 38: Settings To Activate The Shuttle Ferry Mode

    1. INITIAL SETTING AND ADJUSTMENT 1.4.9 Settings to activate the shuttle ferry mode The external switch for the shuttle ferry mode should be registered as "Other Sensor". Note: When there is a FMD-3 00 with Radar mode activated in the same network, the shuttle ferry mode is not available.

  • Page 39: Installation Setting Examples

    1. INITIAL SETTING AND ADJUSTMENT 1.4.10 Installation setting examples This section shows examples of initial settings made at the FAR-3000 and the result- ing output to the AMS, BNWAS and ECDIS. Open [Installation Parameters] [Chart Radar] [No.1 Chart Radar] [Serial Input/Output] to do the settings. Serial Port setting The table below shows examples of settings on the [Serial Input/Output] screen and the resulting output.
  • Page 40 1. INITIAL SETTING AND ADJUSTMENT Serial Output Setting Serial 05 Setting Set the [Serial Output Setting] window as shown in the right figure to output the EVE sen- tence. • [Data Source]: CRA001/RADAR (RA0001) • [Formatter]: EVE • [Thin Out]: Check the checkbox to output with a lower transmission rate when forwarding data.

  • Page 41: Ccrs] Menu

    1. INITIAL SETTING AND ADJUSTMENT Serial 07 Setting <Sentence Filter setting> Set the [Sentence Filter Setting] window as shown in the right figure to limit input to the HBT, ACN (ACK) sentences. • Filter: AMS can send ACN: ACN, HBT AMS can send ACK: ACK Note 1: Check [Input Sentence Filter Enable].

  • Page 42: How To Set [Transmission Group]

    1. INITIAL SETTING AND ADJUSTMENT Item Data Source Remarks Wind Speed/Direction ----- STW(absolute) LOG001 Speed through water STW(position) LOG001 Speed through ground COG/SOG GPS001 Heading Magnetic ----- Water Temperature ----- Current ----- Rate of Turn ----- Transmission Group Setting See subsection 1.5.2. 5.
  • Page 43 1. INITIAL SETTING AND ADJUSTMENT 3. Select a Transmission Group from the Menu bar. Example: Transmission Group Settings for MISC. 4. In the [Transmission Group Talker] fields, remove or add entries as appropriate. 5. Select and adjust other Transmission Group settings as appropriate. 6.
  • Page 44 1. INITIAL SETTING AND ADJUSTMENT Transmission Group Talker Multicast Address Multicast Port NAVD 239.192.0.4 60004 VDRD 239.192.0.5 60005 RCOM 239.192.0.6 60006 TIME 239.192.0.7 60007 PROP 239.192.0.8 60008 USR1 239.192.0.9 60009 USR2 239.192.0.10 60010 USR3 239.192.0.11 60011 USR4 239.192.0.12 60012 USR5 239.192.0.13 60013 USR6...

  • Page 45: Ccrs Setting] Window

    1. INITIAL SETTING AND ADJUSTMENT 1.5.3 [CCRS Setting] window Set if the NSR sentence is output from the CCRS in the [CCRS Setting] window of the [CCRS] menu. This setting is currently unavailable. Confirm that the box has no check mark.

  • Page 46: Ams] Menu

    The AMS menu sets up the interface between the AMS (Alert Management System) and the processor unit, including the AMS operating mode. Note: For how to set the alert definition of AMS, see the FURUNO information. AMS operation mode 1. Access the [Common Installation Setting] menu, then select [AMS] from the tab bar.
  • Page 47 1. INITIAL SETTING AND ADJUSTMENT 3. To save your settings, check the consistency of the data, then save the data. See "[Save and Sync] Menu" on page 1-49. 1-41...

  • Page 48: Alert Define List] Menu

    1. INITIAL SETTING AND ADJUSTMENT [Alert Define List] Menu This [Alert Define List] menu sets the alert group and the alert definition. 1.8.1 Alert Group Setting 1. Access the [Common Installation Setting] menu and click [Alert Define List] on the tab bar.

  • Page 49: How To Add An Alert Group

    1. INITIAL SETTING AND ADJUSTMENT Item Remarks [Details] but- Change the settings of the alert group. See section 1.8.3. [Type No.]* The equipment type which generates the alert. [Data Type]* The alert sentence format (ALF or ALR). This is dependant on the equipment connected to this system.

  • Page 50: How To Edit An Alert Group

    1. INITIAL SETTING AND ADJUSTMENT 3. From the [Type No.] pull-down list in the [Alert Setting] window, select the equip- ment that handles the alert in the alert that you want to register in this group.The alert list appearance depends on the external equipment's sentence format. For ALR sentence Checkbox [+]/[-] button...

  • Page 51: How To Delete An Alert Group

    1. INITIAL SETTING AND ADJUSTMENT 1.8.4 How to delete an alert group 1. Click the [Delete Group] button on the [Alert Group Setting] window, referring to the figure in step 2 of subsection 1.8.1. The list of the alert groups is shown in the [Group Details] window.
  • Page 52 1. INITIAL SETTING AND ADJUSTMENT Item Remarks [Delete Alert] but- Delete the alert definition. See section 1.8.8. Alert extension • [+]/[–]: Click to open/close all alerts ([+]: Open, [-]: Close). button/ This appears when the alert notification sentence is ALF. All selection •...

  • Page 53: How To Add An Alert Definition

    1. INITIAL SETTING AND ADJUSTMENT 6. To save the configuration, perform a consistency check, then save the configura- tion data on the [Save and Sync] menu. 1.8.6 How to add an alert definition An alert definition can be added newly. The maximum number of alert definition is 1,000.

  • Page 54: How To Edit An Alert Definition

    1. INITIAL SETTING AND ADJUSTMENT Item Remarks [Escalation Transfer] Enable or disable transfer of an Alarm priority alert in the transfer escalation mode. Available only for alerts with [Es- calation Mode] set to [Alarm]. [Transfer Time] Set the time to wait before transferring an Alarm priority alert in the transfer escalation mode.

  • Page 55: Data Sharing] Menu

    1. INITIAL SETTING AND ADJUSTMENT 2. Check the checkbox to delete the alert. If all alerts are deleted, check the “Select all” checkbox. 3. Click the [OK] button. 4. To save the configuration, perform a consistency check, then save the configura- tion data on the [Save and Sync] menu.
  • Page 56 1. INITIAL SETTING AND ADJUSTMENT Note 1: After saving the configuration, an Equipment ID that could not save the config- uration correctly may appear in the [Synchro- nous failure] window. In this case, click the [OK] button, then retry [Save]. Note 2: If you did the consistency check and save after entering settings on [Own Ship Setting], reboot the unit.

  • Page 57: How To Save The Configuration Data To A Medium

    1. INITIAL SETTING AND ADJUSTMENT 1.10.2 How to save the configuration data to a medium You can save the configuration data to a medium (PC, USB memory, etc.). Set the medium and then do as follows: 1. Click [Export] at the upper right of the [Save and Sync] menu. Click [Export] The window shown below appears.

  • Page 58: Radar Installation] Menu

    9876-xxxx Sync This menu displays system information of units as shown below. • Processor unit (EC-3000) • Monitor (Furuno made only) • Control unit • Radar processor unit (FCR-2xx9 or FAR-3000) • Sensor adapter Click [System Log] to save the log data to a medium (PC, USB memory, etc.).

  • Page 59: Factory Test & Default] Menu

    1. INITIAL SETTING AND ADJUSTMENT xx.xx.xxxx xx.xx.xxxx xx.xx.xxxx 0359266- xx.xx.xxxx xx.xx.xxxx xx.xx.xxxx xx.xx.xxxx 1. For LAN connection, connect the USB memory which has the update file to the PC connected via LAN. For access with the control unit, insert the update DVD in the processor unit's DVD drive.
  • Page 60 1. INITIAL SETTING AND ADJUSTMENT Alert Define List Alert Define List Data Sharing Data Sharing Save and Sync Save and Sync System Monitor System Monitor Software Update Software Update Factory Test & Default Factory Test & Default The result of the test is shown in this area If "NG"...
  • Page 61 1. INITIAL SETTING AND ADJUSTMENT [Factory Default] The factory default function restores all factory defaults (except the settings on the [Basic Setting] menu). In the default arrangement all processor units powered in the network are restored to default condition.To restore only the settings of the processor unit, disconnect the LAN1 port of the processor unit from the network before restoring the factory defaults.

  • Page 62: Conning] Menu

    1. INITIAL SETTING AND ADJUSTMENT 1.15 [Conning] Menu The [Conning] menu configures the layout and data to show on the conning display. Save / Import / Export Decoder Define Import / Export Decoder Import / Export Menu item Explanation Items on the menu bar Conning (3x6) Consists of 18 blocks (3x6).

  • Page 63: How To Select The Data Source

    1. INITIAL SETTING AND ADJUSTMENT Menu item Explanation Layout You can configure the layout and data to show on the conning display. Drag and drop the components to configure the layout. Click to delete a component from the [Layout] window. To select the data source for a component, click to display the advanced settings window.
  • Page 64 1. INITIAL SETTING AND ADJUSTMENT [Small] components (one block) • [Alert (Current Only)] • [Compass] [Title]: Enter the title of the component. [Sensor Name Source]: Enter the sensor name. [Primary Source]: Select the data source of the upper pointer. [Secondary Source]: Select the data source of the lower pointer. [Decimal Place]: Check the checkbox to show the value after decimal point.
  • Page 65 1. INITIAL SETTING AND ADJUSTMENT • [Dual Horizontal Bar] [Title]: Enter the title of the component. [Primary Source]: Select the data source of the bar. [Secondary Source]: Select the data source of the triangle below the bar. [Start Value]: Set the minimum value of the bar. [End Value]: Set the maximum value of the bar.
  • Page 66 1. INITIAL SETTING AND ADJUSTMENT • [Graph] [Title]: Enter the title of the component. [Type]: Set the graph type. • [(2x)Time/Y-graph]: The [Primary (Y1)] and [Secondary (Y2)] are used as Y-coor- dinate for two independent graphs. The time is used as the X-coordinate for both graphs.
  • Page 67 1. INITIAL SETTING AND ADJUSTMENT [Right Source]: Select the data source of the value shown at the upper right of the bar. [Primary Source]: Select the data source of the green bar. [Secondary Source]: Select the data source of the triangle below the bar. [Start Value]: Set the minimum value of the bar.
  • Page 68 1. INITIAL SETTING AND ADJUSTMENT • [Numeric Data Display] [Title]: Enter the title of the component. [Source]: Select the data source same as [Object 1] or [Object 2] to show the ab- breviated name of the data source unit. [Label]: Enter the data name of [Object 1 (or 2)]. [Limit]: Set the digit number of the data of [Object 1 (or 2)].
  • Page 69 1. INITIAL SETTING AND ADJUSTMENT • [Stabilizer Status] [Title]: Enter the title of the component. [Object1 (to 4)] [Label]: Enter the data name of [Object 1 (or 2)]. [Source]: Select the data source of [Object 1 (or 2)]. • [Steering Mode] •...
  • Page 70 1. INITIAL SETTING AND ADJUSTMENT [Remaining Time Source]: Select the data source of the remaining time. • [Watch Alarm (Multi)] [Title]: Enter the title of the component. [Backup Source]: Cannot be changed. Set automatically. [Stage Source (ALR)]: Select the Stage Source (ALR). [Stage Source (wtr)]: Select the Stage Source (wtr).
  • Page 71 1. INITIAL SETTING AND ADJUSTMENT • [Check ETA] [Title]: Enter the title of the component. • [Command Matrix] [Title]: Enter the title of the component. [Control Type]: Set the number of columns for the matrix. [Thruster Num]: Set the number of rows for the matrix. [Control Type Label]: Enter the text that appears at the top of the matrix.
  • Page 72 1. INITIAL SETTING AND ADJUSTMENT [Scale Resolution]: Select the scale resolution. [Decimal Place]: Check the checkbox to show the value after decimal point. [Mathematical Sign]: Check the checkbox to show the minus sign (-) when the value is a negative figure. •...
  • Page 73 1. INITIAL SETTING AND ADJUSTMENT [Dial Title]: Enter the title to show at the top of [Dial Meter 1 (or 2)] indicator. [Primary Source]: Select the data source of the long pointer of [Dial Meter 1 (or 2)] indicator. [Secondary Source]: Select the data source of the outer pointer of [Dial Meter 1 (or 2)] indicator.
  • Page 74 1. INITIAL SETTING AND ADJUSTMENT [MAX Generate (kW)]: Enter the maximum values of the graphs ([Object 1] to [Ob- ject 9]). [Source State]: Set the source that outputs operating status. The green indication of the graph means the generator is working, the red indication means the generator has stopped.
  • Page 75 1. INITIAL SETTING AND ADJUSTMENT • [Graph (Wind Speed & Direction)] [Title]: Enter the title of the component. [Label]: Enter the title of [Wind Speed] and [Wind Direction]. [Source]: Select the source of [Wind Speed] and [Wind Direction]. [Unit]: Enter the unit of [Wind Speed] and [Wind Direction]. [Smoothing]: Select [Apply] to smooth the graph.
  • Page 76 1. INITIAL SETTING AND ADJUSTMENT [Decimal Place]: Check the checkbox to show the value after decimal point. [Mathematical Sign]: Check the checkbox to show the minus sign (-) when the value is a negative figure. • [Next Leg] • Pitch And Roll [Title]: Enter the title of the component.
  • Page 77 1. INITIAL SETTING AND ADJUSTMENT [Local Time (Date) Source]: Select the data source of the date information. [Sensor Name Source]: Select the appropriate sensor name source. • [Track Order] [Title]: Enter the title of the component. • [Two Dimension Plotter] [Title]: Enter the title of the component.
  • Page 78 1. INITIAL SETTING AND ADJUSTMENT [Bottom Source]: Select the data source for the data at the bottom of the vertical bar. [Primary Source]: Select the data source of the green bar. [Secondary Source]: Select the data source of the triangle indicator. [Start Value]: Set the minimum value of the bar.
  • Page 79 1. INITIAL SETTING AND ADJUSTMENT • [Winch] [Title]: Enter the title of the component. [Type]: Select [Main only] or [Port and Stbd]. For [Main only], the information of only the main winch is shown. For [Port and Stbd], the information of each winch on both the port and starboard is shown.
  • Page 80 1. INITIAL SETTING AND ADJUSTMENT • [Wind Direction] [Title]: Enter the title of the component. [Location]: Select the reference point for the wind direction and speed from the pull- down list. [Theoretical] [Label]: Enter the data name for the theoretical wind direction and speed. [Source]: Select the data source of the theoretical wind direction and speed.
  • Page 81 1. INITIAL SETTING AND ADJUSTMENT [STW Longitudinal Speed]: Select the data source of the longitudinal STW. [Bow Transverse Speed]: Select the data source of the longitudinal speed at the bow position. [Stern Transverse Speed]: Select the data source of the longitudinal speed at the stern position.
  • Page 82 1. INITIAL SETTING AND ADJUSTMENT • [Fore & AFT bridge], [Fore & AFT bridge (Wide)] to [Fore & AFT bridge9 (Wide]) Multiple components are combined on this window. The contents are same as the single component. • Nav. Information [Title]: Enter the title of the component. [Component.Height]: Select the size of component.
  • Page 83 1. INITIAL SETTING AND ADJUSTMENT • Present Leg • Speed And Transverse [Title]: Enter the title of the component. [Location]: Select the component to display, [FORE], [AFT], [STBD] or [PORT]. [Speed Label]: Enter the data name of speed. [Transverse Label]: Enter the name of transverse. [SOG Longitudinal Speed]: Select the data source of the longitudinal SOG.
  • Page 84 1. INITIAL SETTING AND ADJUSTMENT • [Vertical Graph] [Title]: Enter the title of the component. [Label]: Enter the title of [Primary] or [Secondary]. [Source]: Select the data source of [Primary] or [Secondary]. [Source (sub)]: Set the other data source in the same range as the data of [Primary]. The [Source (sub)] appears only when the source of [Secondary] is not entered.
  • Page 85 1. INITIAL SETTING AND ADJUSTMENT [Label]: Enter the title of [Heading] or [Other]. [Source]: Select the data source of [Heading] or [Other]. [Source (sub)]: Set the other data source in the same range as the data of [Head- ing]. The [Source (sub)] appears only when the source of [Other] is not entered. [Unit]: Set the unit in the [Heading] and [Other].
  • Page 86 1. INITIAL SETTING AND ADJUSTMENT This page is intentionally left blank. 1-80...

  • Page 87: Setting For Sensor Adapter

    SETTING FOR SENSOR ADAPTER The default Equipment ID of the sensor adapter is “MCV016”. Set the individual Equip- ment ID before connecting to the network. Connect the sensor adapter to the processor unit after setting the Equipment ID. Then enter the other settings of the sensor adapter from the [Common Installation Setting] menu on the processor unit.

  • Page 88: How To Save The Log File

    2. SETTING FOR SENSOR ADAPTER How to restore the default Equipment ID When you can not define the Equipment ID of the sensor adapter, restore the default and set the Equipment ID again. 1. Turn on the No. 8 segment of the DIP switch S10 on the board in the MC-3000S, then turn on the sensor adapter.

  • Page 89: How To Activate The Maintenance Program

    2. SETTING FOR SENSOR ADAPTER 2.3.1 How to activate the maintenance program 1. Turn off all sensor adapters. 2. Connect the applicable MC-3000S to the PC with the LAN cable. 3. Turn on the No. 6 of the DIP-SW (S10) on the MC-CS board (24P0114). 4.

  • Page 90: How To Update The Firmware Program

    2. SETTING FOR SENSOR ADAPTER 2.3.3 How to update the firmware program 1. Delete the version number from the firmware binary file name. Example 2450081-01010088_mc_cs_mainpg.bin Program number Version number Delete the version number from the file name. Example 2450081_mc_cs_mainpg.bin 2. Activate the maintenance program of the sensor adapter MC-3000S. ®...
  • Page 91 2. SETTING FOR SENSOR ADAPTER 7. After the login, enter “dir”. The file names that are saved in the sensor adapter are displayed. Confirm that the file names shown below are shown on the display. Enter the user name. Enter the user name. Enter the user name.
  • Page 92 2. SETTING FOR SENSOR ADAPTER This page is intentionally left blank.

  • Page 93: Hub-3000 Igmp Querier

    HUB-3000 IGMP Querier Setup the IGMP querier function of HUB-3000 to connect the FAR-2xx7 series radar to FAR-3000 series radar via HUB-3000. Preparations • PC with port RS-232C (D-SUB 9-pin connector) • Cross cable RS-232C (D-SUB 9-pin connector) • Software for serial device control (HyperTerminal, Tera Term or Putty etc.) RS-232C cross cable Pin (Female) Pin No.
  • Page 94 3. HUB-3000 IGMP Querier 6. Select [Setup], [Serial port] to show the setting window. 7. Set as follows then click [OK]. • [Baud rate]: 9600 • [Data]: 8 bit • [Parity]: none • [Stop]: 1 bit • [Flow control]: none 8.
  • Page 95 3. HUB-3000 IGMP Querier 17. Enter “write” in the [Switch#], then press the Enter key. Reboot the HUB-3000 af- ter performing “write” to enable the querier function of HUB-3000. Switch# config Switch_config# ip igmp-snooping querier Switch_config# show ip igmp-snooping Global IGMP snooping configuration: ----------------------------------- Globally enable : Enabled...
  • Page 96 3. HUB-3000 IGMP Querier This page is intentionally left blank.

  • Page 97: Appendix 1Equipment Id List

    APPENDIX 1 EQUIPMENT ID List Gateway Sensor Equipment ID Equipment Name Remarks Network Network MFD001 No.1 MFD 192.168.31.51 172.31.16.51 MFD002 No.2 MFD 192.168.31.52 172.31.17.51 MFD003 No.3 MFD 192.168.31.53 172.31.16.52 MFD004 No.4 MFD 192.168.31.54 172.31.17.52 MFD005 No.5 MFD 192.168.31.55 172.31.16.53 MFD006 No.6 MFD 192.168.31.56 172.31.17.53...
  • Page 98 APPENDIX 1 EQUIPMENT ID List Gateway Sensor Equipment ID Equipment Name Remarks Network Network RAD112 No.2 FAR-2 8 Radar 192.168.31.22 172.31.17.11 RAD113 No.3 FAR-2 8 Radar 192.168.31.23 172.31.16.12 RAD114 No.4 FAR-2 8 Radar 192.168.31.24 172.31.17.12 Default setting for pro- CRA001 No.1 Chart Radar 192.168.31.31 172.31.16.21...

  • Page 99: Appendix 2Sub System

    APPENDIX 2 SUB SYSTEM To share the sensor data throughout the system, use HUB-3000 and HUB-100 and connect equip- ment in subsystems. For example, in the configuration below, the system does not have HUB-100. In this case the No.1 Chart radar can only receive data from the No. 2 Gyro and the No.1 ECDIS can only receive data from the No.

This manual is also suitable for:

Far-3320Far-3220Far-3310Far-3230sFar-3230s-ssdFar-3320w ... Show all

Table of Contents