Safety Instructions - Furuno FAR-3210 Installation Manual

SAFETY INSTRUCTIONS

The installer of the equipment must read the applicable safety instructions before attempting to install
the equipment.
DANGER
WARNING
CAUTION
Warning, Caution
Wear a safety belt and hard hat when working on the antenna unit.
Serious injury or death can result if someone falls from the radar antenna mast.
WARNING
Do not open the equipment unless
totally familiar with electrical circuits
and service manual.
Only qualified personnel are allowed to
work inside the equipment.
Construct a suitable service
platform from which to install the
antenna unit.
Serious injury or death can result if
someone falls from the radar antenna
mast.
Turn off the power at the mains
switchboard before beginning the
installation.
Fire, electrical shock or serious injury
can result if the power is left on or is
applied while the equipment is being
installed.
Indicates a potentially hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
can result in minor or moderate injury.
Prohibitive Action
DANGER
Mandatory Action
WARNING
Be sure that the power supply is
compatible with the voltage rating of
the equipment.
Connection of an incorrect power
supply can cause fire or damage the
equipment.
Use only the specified power cable.
Fire or damage to the equipment can
result if a different cable is used.
Do not install the monitor unit,
processor unit, power supply unit
(PSU), or control unit in a dusty
environment, or one where the units
may get wet from rain or water
splash.
Dust or water in the units can result in
fire, electrical shock, or damage to the
equipment.
Attach protective earth securely to
the ship's body.
The protective earth (grounding) is
required for the AC power supply to
prevent electrical shock.
i