Functions Available; Timer; Setting The Programs; Assigning The Programs To Specific Days - Jøtul PF 500 Installation, Operation And Maintenance Manual

11 FUNCTIONS AVAILABLE

11�1 TIMER
It's possible to set, enable and assign to the various days
of the week, customised programs for automatically
switching the stove on and off.
Up to six customised programs can be set.
For each program, the following can be set: on time, off
time and desired temperature.
Up to three programs can be assigned for each day of the
week.
The days of the week are identified by numbers:
Monday = "d1", Tuesday = "d2";...; Sunday = "d7".
11�2 SETTING THE PROGRAMS
a) Use the arrow buttons
then press to confirm;
b) Use the button to select the password
to confirm;
c) Use the button to scroll to and select submenu
then press to confirm;
d) Use the buttons to scroll the programs
with the button the one you want to modify;
e) The on hours value will flash; set the value using the
buttons and press ;
f) The minutes value will flash; set the value using the
buttons and press ;
g) The off hours value will flash; set the value using the
buttons and press ;
h) The minutes value will flash; set the value using the
buttons and press ;
i) The desired temperature value will flash; set the value using
the buttons and press;
j) Press the button to confirm the settings.
11�3 ASSIGNING THE PROGRAMS TO
SPECIFIC DAYS
This function can be used to assign up to three different
programs to a certain day.
a) Use the arrow buttons
then press to confirm;
b) Use the button to select the password
to confirm;
c) Use the button to scroll to and select submenu
then press to confirm;
d) Use the buttons to choose the day
assign the programs to;
e) Select this using the button;
f) The value of the first program to assign will flash:
to disable;
"off"
g) Set the value using the
confirm;
h) The value of the second program to assign will flash:
or to disable;
"off"
i) Set the value using the
confirm;
j) The value of the third program to assign will flash:
to disable;
"off"
k) Set the value using the
confirm the setting;
to go to the setup menu and
and then press
"7"
and
[2]
, select
P1–P6
e
to go to the setup menu and
and then press
"7"
and
[1]
[d1]–[d7]
P1–P6
buttons and press
P1–P6
buttons and press
P1–P6
buttons and press
11�4 ENABLING/DISABLING THE TIMER
a) Use the arrow buttons
b) Select this using the
c) Use the buttons to scroll and select:
the timer or
"off"
d) Press the button
When the timer is enabled, the
indicating that the timer is active.
11�5 "ECO MODE" SAVING FUNCTION
Enabling this function means that the stove switches
off when reaching the desired room temperature. If this
function is not enabled, the stove modulates operation so
as to maintain the desired temperature while consuming
the least amount of fuel possible.
To enable/disable the function:
a) Use the arrow buttons
and then press
b) Use the button to select the password
to confirm;
c) Use the button to scroll to and select submenu
then press to confirm;
e
d) Set one of the following values using the
• "Eco Mode" function enabled
eco
• "Eco Mode" function disabled
off
e) Press the button
11�6 RESTART DELTA FUNCTION
The Restart delta is the number of degrees centigrade
below the switch-off temperature at which the stove
switches on again automatically. For example, if the
stove is set to switch off at 20°C (Eco Mode active) and
"Restart delta" is set to 4°C, the stove will switch on again
when the temperature measured is less than or equal to
16°C.
To set the restart delta value:
a) Use the arrow buttons
and then press
b) Use the button to select the password
to confirm;
c) Use the button to scroll to and select submenu
then press to confirm;
d) The value will flash, change it using the
to
0,5°C - 5,0°C
);
e) Press the button to confirm the set value.
11�7 RESTARTING AFTER A POWER
or
FAILURE
In the event of power failures, the stove will switch back
to
on automatically, checking the safety conditions, when
power returns.
11�8 "LOCK KEYPAD" FUNCTION
This function is used to disable the use of the control
to
panel and avoid accidental modifications.
To enable/disable the function:
or
to
ENGLISH
to go to the Timer menu
button;
"on"
to disable it;
to confirm the selection.
icon will be on steady,
to go to the setup menu
to confirm;
and then press
"7"
to confirm the settings.
to go to the setup menu
to confirm;
and then press
"7"
.
to enable
and
[7]
buttons:
and
[8]
buttons (
25