Pc With Wi-Fi Adapter - D-Link DIR-882 User Manual

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual

PC with Wi-Fi Adapter

1. To connect via USB modem: сonnect your USB modem to one of two USB ports
!
In some cases you will need to reboot the router after connection of the USB modem.
2. Connect the power cord to the power connector port on the back panel of the router, then
plug the power adapter into an electrical outlet or power strip.
3. Turn on the router by pressing the POWER button on its back panel.
4. Make sure that your Wi-Fi adapter is on. As a rule, modern notebooks with built-in wireless
NICs are equipped with a button or switch that turns on/off the wireless adapter (refer to
your PC documents). If your PC is equipped with a pluggable wireless NIC, install the
software provided with your Wi-Fi adapter.
Then make sure that your Wi-Fi adapter is configured to obtain an IP address automatically (as
DHCP client).
9 It is recommended to use a USB extension cable to connect a USB modem to the router.
Page 32 of 303
Installation and Connection
9
.