Client - D-Link DIR-882 User Manual

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual

Client

On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access
point or to a WISP. To configure the 2.4GHz band or 5GHz band, go to the relevant tab.
To configure the router as a client, move the Enable switch to the right. Upon that the following
fields are displayed on the page:
Parameter
Broadcast wireless
network 2.4 GHz /
Broadcast wireless
network 5 GHz
Connecting to network
Figure 136. The page for configuring the client mode.
If the switch is moved to the left, devices cannot connect to the
router's WLAN. Upon that the router can connect to another access
point as a wireless client.
A method for connecting to another access point.
Page 169 of 303
Configuring via Web-based Interface
Description