D-Link DIR-882 User Manual page 170

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
In the Wireless Networks section, the list of available wireless networks is displayed. To view
the latest data on available wireless networks, click the UPDATE LIST button.
To connect to a wireless network from the list, select the needed network. Move the Network
options switch to the right to view more detailed information on the network to which the router
connects. If a password is required, enter it in the relevant field. Click the CONNECT button.
To connect to a hidden network, select the Connect to hidden network value from the
Connecting to network drop-down list. Enter the name of the network in the Network name
(SSID) field. If needed, fill in the BSSID field. Then select the needed type of authentication from
the Network authentication drop-down list.
When the Open or WEP authentication type is selected, the following settings are displayed on the
page:
Parameter
Enable encryption WEP
Default key ID
Encryption key WEP as
HEX
Encryption key
(1-4)
When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed authentication type is
selected, the following fields are displayed:
Parameter
Password PSK
Encryption type
When you have configured the parameters, click the APPLY button.
When connecting to a wireless access point, the wireless channel of DIR-882 will switch to the
channel of the access point to which you have connected.
In addition, the Connection Information section in which you can view the connection status
and the network basic parameters is displayed.
For Open authentication type only.
To activate WEP encryption, move the switch to the right. Upon that
the Default key ID drop-down list, the Encryption key WEP as
HEX switch, and four Encryption key fields are displayed on the
page.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Move the switch to the right to set a hexadecimal number as a key
for encryption.
Keys for WEP encryption. The router uses the key selected from the
Default key ID drop-down list. It is required to specify all the
fields. Click the Show icon (
A password for WPA encryption. Click the Show icon (
display the entered key.
An encryption method: TKIP, AES, or TKIP+AES.
Page 170 of 303
Configuring via Web-based Interface
Description
) to display the entered key.
Description
) to