Vpn; Ipsec - D-Link DIR-882 User Manual

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual

VPN

In this menu you can configure VPN connections based on IPsec/GRE/EoGRE/EoIP protocols and
create a PPTP or L2TP server and accounts for access to it.

IPsec

On the VPN / IPsec page, you can configure VPN tunnels based on IPsec protocol.
IPsec is a protocol suite for securing IP communications.
To allow IPsec tunnels, move the Enable switch to the right. Upon that the Tunnels and Status
sections and the Logging level drop-down list are displayed on the page.
In the Status section, the current state of an existing tunnel is displayed.
From the Logging level drop-down list, select a detail level of messages recorded to the system
log or leave the value specified by default. The Basic value is recommended to establish an IPsec
tunnel faster. To view the log, go to the System / Log page (see the Log section, page 276).
Figure 112. The VPN / IPsec page.
Page 132 of 303
Configuring via Web-based Interface