D-Link DIR-882 User Manual page 49

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
In order to connect your device to the network of a 3G or LTE operator, on the Device mode
page, from the Connection method list, select the Autonomous value. Then from the Work
mode list, select the Mobile Internet value. In this mode you can configure a 3G/LTE WAN
connection, set your own settings for the wireless network in the 2.4GHz and 5GHz bands, and set
your own password for access to the web-based interface of the device.
Figure 34. Selecting an operation mode. The Mobile Internet mode.
In order to connect your device to a wireless ISP (WISP), on the Device mode page, from the
Connection method list, select the Autonomous value. Then from the Work mode list, select
the WISP Repeater value. In this mode you can connect your device to another access point,
configure a WAN connection, set your own settings for the wireless network in the 2.4GHz and
5GHz bands, and set your own password for access to the web-based interface of the device.
Figure 35. Selecting an operation mode. The WISP Repeater mode.
Page 49 of 303
Configuring via Web-based Interface