D-Link DIR-882 User Manual page 159

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Parameter
Enable encryption WEP
Default key ID
Encryption key WEP as
HEX
Encryption key
(1-4)
When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed value is selected, the
following fields are displayed on the page:
Figure 130. The WPA2-PSK value is selected from the Network authentication drop-down list.
Parameter
Password PSK
Encryption type
Group key update
interval
14 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
For Open authentication type only.
To activate WEP encryption, move the switch to the right. Upon that
the Default key ID drop-down list, the Encryption key WEP as
HEX switch, and four Encryption key fields are displayed on the
page.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Move the switch to the right to set a hexadecimal number as a key
for encryption.
Keys for WEP encryption. The router uses the key selected from the
Default key ID drop-down list. It is required to specify all the
fields. Click the Show icon (
A password for WPA encryption. The password can contain digits,
Latin letters (uppercase and/or lowercase), and other characters
available in the US keyboard layout.
display the entered password.
An encryption method: TKIP, AES, or TKIP+AES.
The time period (in seconds), at the end of which a new key for WPA
encryption is generated. When the value 0 is specified for this field,
the key is not renewed.
Page 159 of 303
Configuring via Web-based Interface
Description
) to display the entered key.
Description
14 Click the Show icon ( ) to