D-Link DIR-882 User Manual page 181

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Parameter
Network name (SSID)
In the Security Settings section, specify security settings of your mesh network.
select the needed type of authentication from the Network authentication drop-down list.
When the WPA2-PSK authentication type is selected, the following fields are displayed:
Parameter
Password PSK
Encryption type
When you have configured the parameters, click the APPLY button.
To complete your mesh network configuration, connect the subordinate device to a LAN port of the
main device using an Ethernet cable. Wait for about 5-6 minutes. When all the settings are applied,
the Power LED should be solid orange. Then, if needed, disconnect the Ethernet cable and move
the subordinate device to its workplace.
To view data on the current state of your mesh network, select the needed value from the
Statistics drop-down list.
• Network Overview: When this value is selected, information on all devices of your mesh
network is displayed on the page. The value is unavailable if your device is configured as a
subordinate one.
•
List of APs: When this value is selected, information on all devices of your mesh network
is displayed on the page.
•
List of Clients: When this value is selected, information on all clients connected to the
devices of your mesh network is displayed on the page.
•
Neighbours: When this value is selected, a connection scheme of your mesh network
devices is displayed on the page.
Parameter
Model
Domain
15 Security settings should be the same for all devices of your mesh network.
A name of the mesh network. This value should be the same for all
devices of your mesh network.
Clients connected to devices of a mesh network cannot see the mesh
network and cannot connect to it.
A password for WPA encryption. Click the Show icon (
display the entered key. By default, WPS PIN from the barcode label
is used as the network key.
An encryption method: AES.
Network Overview / List of APs
The model of a device.
The identifier which shows that a device belongs to the mesh
network.
Page 181 of 303
Configuring via Web-based Interface
Description
Description
Description
15
To do this,
) to