D-Link DIR-882 User Manual page 244

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
When the protocol is enabled, the following elements are displayed on the page:
Parameter
Mode
Priority
Status
Interface
VRID
Priority
IP address
Mask
Delay
Assign virtual MAC
address
The operation mode of the router.
• Master: The router ensuring data transfer at present. A
device with a higher priority switches to the Master mode.
• Backup: A reserve router, which switches to the Master
mode upon the main router failure in accordance with its
priority level.
The current priority level of the device. It can differ from the priority
specified by the user if the Enable Object Tracking switch is
moved to the right.
The status of the service working over VRRP.
• Disable: The service is not active.
•
Enable: The service is active.
A network interface used by VRRP.
Specify a unique ID of the virtual router. By default, the value 1 is
specified.
The priority of the router over other devices, which is used to switch
it to the Master mode. Specify a value from the range 1~255. By
default, the value 100 is specified. If several devices have the same
priority level, the router with the highest IP address will switch to
the Master mode.
The IP address used by LAN devices to access the router.
The subnet mask of the virtual router.
An interval (in seconds) between sending service advertisements,
containing information on the priority level and connection status of
the device working in the Master mode. By default, the value 1 is
specified.
Move the switch to the right to enable access to the virtual router by
a virtual MAC address. A virtual MAC address is generated
automatically.
Page 244 of 303
Configuring via Web-based Interface
Description