Mesh Network Subordinate Device (Slave) - D-Link DIR-882 User Manual

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual

Mesh Network Subordinate Device (Slave)

In order to configure DIR-882 as a subordinate device of your mesh network, from the
Connection method list, select the Super Mesh value. Then from the Device Role list, select
the Slave value. From the Frequency band list, select the band where your main device (in the
Master role) operates.
Then a device in the Slave role is configured in the access point mode. In this mode you can change
the LAN IP address, set your own settings for the wireless network in the 2.4GHz and 5GHz bands,
and set your own password for access to the web-based interface of the device.
Figure 41. Configuring the Super Mesh function for a subordinate device.
Page 55 of 303
Configuring via Web-based Interface