D-Link DIR-882 User Manual page 240

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
In the Main Settings section, you can specify the following parameters:
Parameter
Interface
Lease time
Logging level
IP address
Mask
Ping
Figure 187. The page for adding an authorization server. The RADIUS server section.
In the RADIUS server section, you can specify the following parameters:
Parameter
Primary RADIUS server
address / Secondary
RADIUS server address
From the drop-down list, select a physical or virtual interface to be
used for the authorization server. In order to specify an additional
interface, for example, a separate LAN port or a Wi-Fi network, it is
necessary to create another VLAN for this port or network (see the
VLAN section, page 209).
The interval (in seconds) between sending authorization requests to
clients.
Select a type of messages and alerts/notifications to be logged.
Specify an IP address of the router to be used for authorized client
access.
Specify a subnet mask.
If the switch is moved to the right, the router responds to ping
requests by the IP address specified on this page. For security
reasons, it is recommended to disable this function.
Enter addresses of the primary and secondary RADIUS servers in the
relevant fields.
Page 240 of 303
Configuring via Web-based Interface
Description
Description