DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
IPv6
Go to the IPv6 tab to change or add the IPv6 address of the router, configure IPv6 addresses
assignment settings, specify MAC address and IPv6 address pairs, or add own DNS records.
Figure 102. Configuring the local interface. The IPv6 tab. The Local IPv6 Address section.
To add an IPv6 address of the router, click the ADD button (
the router, select it in the table.
Figure 103. Configuring the local interface. The IPv6 tab. The window for adding an IPv6 address.
In the opened window, you can specify the following parameters:
Parameter
IPv6 address
Prefix
Gateway IPv6 address
Click the APPLY button.
To remove the IPv6 address, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
address in the editing window.
Local IPv6 Address
The IPv6 address of the router in the local subnet.
The length of the prefix subnet.
Available if the Access point or Repeater mode was selected in
the Initial Configuration Wizard.
The gateway IPv6 address which is used by the router to connect to
the Internet (e.g., for synchronizing the system time with an NTP
server). Optional.
). Then click the APPLY button. Also you can remove the IPv6
Page 121 of 303
Configuring via Web-based Interface
). To change the IPv6 address of
Description