D-Link DIR-882 User Manual page 109

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Parameter
NAT
NATv6
Ping
Figure 91. The page for creating a new Mobile Internet connection. The Modem settings section.
If the switch is moved to the right, the network address translation
function for IPv4 is enabled. Do not disable the function unless your
ISP requires this.
The switch is displayed when the IPv4 or Dual value is selected
from the Type drop-down list in the Modem settings section.
If the switch is moved to the right, the network address translation
function for IPv6 is enabled. Do not disable the function unless your
ISP requires this.
The switch is displayed when the IPv6 or Dual value is selected
from the Type drop-down list in the Modem settings section.
If the switch is moved to the right, the router responds to ping
requests from the external network through this connection. For
security reasons, it is recommended to disable this function.
Page 109 of 303
Configuring via Web-based Interface
Description