D-Link DIR-882 User Manual page 117

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Parameter
Start IP
End IP
Lease time
DNS relay
External DHCP server IP
Option 82 Circuit ID
Option 82 Remote ID
Option 82 Subscriber ID
When all needed settings are configured, click the APPLY button.
• Relay: An external DHCP server is used to assign IP
addresses to clients. When this value is selected, the
External DHCP server IP, Option 82 Circuit ID,
Option 82 Remote ID, and Option 82 Subscriber ID
fields are displayed on the tab. Available if the Router,
WISP Repeater, or Mobile Internet mode was selected
in the Initial Configuration Wizard.
The start IP address of the address range used by the DHCP server to
distribute IP addresses to clients.
The end IP address of the address range used by the DHCP server to
distribute IP addresses to clients.
The lifetime of IP addresses leased by the DHCP server. At the end
of this period the leased IP address is revoked and can be distributed
to another device, unless the previous device has confirmed the need
to keep the address.
Move the switch to the right so that the devices connected to the
router obtain the address of the router as the DNS server address.
Move the switch to the left so that the devices connected to the
router obtain the address transmitted by the ISP or specified on the
Advanced / DNS page as the DNS server address.
The IP address of the external DHCP server which assigns IP
addresses to the router's clients.
Available if the Router, WISP Repeater, or Mobile Internet
mode was selected in the Initial Configuration Wizard.
The value of the relevant field of DHCP option 82. Do not fill in the
fields unless your ISP or the administrator of the external DHCP
server provided these values.
Page 117 of 303
Configuring via Web-based Interface
Description