D-Link DIR-882 User Manual page 142

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
You can specify the following parameters:
Parameter
Server local IP address The IP address of the VPN server.
Start client IP
End client IP
Interface
VPN ↔ LAN
VPN ↔ WAN
VPN → Router
NAT VPN → WAN
NAT VPN → LAN
VPN network
The start IP address of the address range for VPN server's clients.
The end IP address of the address range for VPN server's clients.
Select a WAN connection through which this VPN server will be
available. If the Default gateway value is selected, the router uses
the default WAN connection.
Access policies and NAT
Select a value from the drop-down list.
•
Allow: VPN server's clients can access the router's local
network; clients from the router's local network can access
the VPN server's network.
• Deny: VPN server's clients cannot access the router's local
network; clients from the router's local network cannot
access the VPN server's network.
Select a value from the drop-down list.
•
Allow: VPN server's clients can access the external network;
clients from the external network can access the VPN
server's network.
• Deny: VPN server's clients cannot access the external
network; clients from the external network cannot access the
VPN server's network.
Select a value from the drop-down list.
•
Allow: VPN server's clients can access the router.
• Deny: VPN server's clients cannot access the router.
If the switch is moved to the right, the network address translation
function between the VPN server's interface and the external
network interface is enabled.
If the switch is moved to the right, the network address translation
function between the VPN server's interface and the local network
interface is enabled.
Page 142 of 303
Configuring via Web-based Interface
Description