D-Link DIR-882 User Manual page 203

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Parameter
Mode
RSSI
Signal level
Operator name
Roaming
IMSI
PIN status
SMS
If the PIN code check for the SIM card inserted into your USB modem is not disabled, the PIN
INPUT button is displayed on the page.
To disable the PIN code check, click the DISABLE PIN CODE REQUEST button (the button is
displayed if the PIN code check is enabled). In the opened window, enter the current PIN code in
the PIN code field and click the DISABLE button.
To enable the PIN code check, click the ENABLE PIN CODE REQUEST button (the button is
displayed if the PIN code check is disabled). In the opened window, enter the PIN code used before
disabling the check in the PIN code field and click the ENABLE button.
To change the PIN code, click the CHANGING PIN CODE button (the button is displayed if the
PIN code check is enabled). In the opened window, enter the current code in the PIN code field,
then enter a new code in the New PIN code and New PIN code confirmation fields and click
the SAVE button.
Network information
A type of the network to which the USB modem is connected.
The strength of the signal received by the USB modem.
The signal level at the input of the modem's receiver. The zero
signal level shows that you are out of the coverage area of the
selected operator's network.
The name of the mobile operator proving the service.
Roaming mode status of the SIM card inserted into the USB
modem.
The code stored in the SIM card inserted into your USB modem.
PIN code request status of the SIM card inserted into the USB
modem.
The number of text messages stored in the memory of the SIM card
inserted into the USB modem.
Click the number of text messages in the line to go to USB Modem
/ Modem name / SMS page.
Page 203 of 303
Configuring via Web-based Interface
Description