Log - D-Link DIR-882 User Manual

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual

Log

On the System / Log page, you can set the system log options and configure sending the system
log to a remote host and/or a USB storage connected to the router.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Figure 207. The System / Log page. The Settings tab.
Page 276 of 303
Configuring via Web-based Interface