Ii-3-4 Wps - Draytek VigorAP 906 User Manual

MAC Address Filter
MAC
Object
Cancel
Backup
Restore
After finishing this web page configuration, please click OK to save the settings.

II-3-4 WPS

Open Wireless LAN>>WPS to configure the corresponding settings.
Available settings are explained as follows:
Item
Enable WPS
WPS Configured
Display all MAC addresses that are edited before.
Client's MAC Address - Manually enter the MAC address of the
wireless client.
Add - Add a new MAC address to the list.
Delete - Delete the selected MAC address in the list.
Edit - Edit the selected MAC address in the list.
In addition, to enter the MAC address of the device manually, you can
Device Group - Select one of the existed device groups and click Add.
All the devices belonging to the selected group will be shown on the
MAC Address Filter table.
Device Object - Select one of the existed device objects and click Add.
The MAC address of the device will be shown on the MAC Address
Filter table.
Give up the access control set up.
Click it to store the settings (MAC addresses on MAC Address Filter
table) on this page as a file.
Click it to restore the settings (MAC addresses on MAC Address Filter
table) from an existed file.
Description
Check this box to enable the WPS setting.
Display related system information for WPS. If the wireless security
40