II-4-1 Mesh Setup
Such a page can determine the role of the VigorAP connecting to the computer physically. For a
mesh root, you can search and specify mesh nodes as members under the current mesh group.
Available settings are explained as follows:
Item
General Setup
Role
Description
Mesh Root – When VigorAP is connected to a Vigor router with a
physical Ethernet cable, it can be set as a mesh root to deliver the
wireless signals to a mesh node AP.
Mesh Node – As a mesh node, such VigorAP can pass the wireless
connection signal to another mesh node or a remote device (PC, CPE,
mobile phone).
In addition, VigorAP can be searched by mesh root AP and join the
mesh group of the root AP. The configuration, set for mesh root can
be applied to the mesh node.
Log Level – Choose Basic or Detailed. Related information will be
shown on the Diagnostics>>System Log.
65