Iii-1-6 Syslog/Mail Alert - Draytek VigorAP 906 User Manual

III-1-6 Syslog/Mail Alert

Syslog function is provided for users to monitor AP. There is no bother to directly get into the Web
user interface of the AP or borrow debug the equipment.
Available settings are explained as follows:
Item
Syslog Access Setup
Mail Alert Setup
Description
Enable - Check Enable to activate the function of Syslog.
Server IP Address -The IP address of the Syslog server.
Destination Port -Assign a port for the Syslog protocol. The default
setting is 514.
Log Level - Specify which level of the severity of the event will be
recorded by Syslog.
Enable - Check Enable to activate the function of mail alert.
SMTP Server - The IP address of the SMTP server.
SMTP Server Port - Set the port number for the SMTP server.
Mail To - Assign a mail address for sending mails out.
96