Table of Contents
Advertisement
4.
After sending configuration to VigorAP, it will take some time to take effect. Now, the VigorAP
has been set as Mesh Root. You can search several Mesh Nodes which do not belong to any
other mesh group by clicking Next.
5.
Later, available VigorAP devices will be shown as the left figure below. Choose the Mesh Node
you want to add and give a device name (e.g., VigorAP903) for it. The selected mesh node(s)
will be grouped under such mesh root. Click Next. After checking the quantity of mesh node
and mesh information and click Apply.
139
Advertisement
Table of Contents
