Table of Contents
Advertisement
Item
Enable
Comments
Primary Server
Secret
Authentication Port
Retry
Save and Next
After finishing this web page configuration, please click Save and Next for the next setting page.
(3) Whitelist Settings
Users are allowed to send and receive the traffic that satisfies whitelist settings. IPs under the
whitelist will not be redirected to other website (URL).
Description
Check it to enable the RADIUS server settings.
Enter a brief description for this profile.
Enter the IP address of the RADIUS server.
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides must be
configured to use the same shared secret. The maximum length of the
shared secret you can set is 36 characters.
The UDP port number that the RADIUS server is using. The default
value is 1812, based on RFC 2138.
Set the number of attempts to perform reconnection with the RADIUS
server.
Click to access into next page.
83
Advertisement
Table of Contents
