Draytek VigorAP 906 User Manual page 11


Note:
For the sake of security, make the accessory kit away from children.
Interface Description
WLAN Wireless band will be switched /changed according to
the button pressed and released. For example,
ON/OFF

2.4G (On) and 5G (On) – in default.
WPS

2.4G (Off) and 5G (On) – pressed and released the
button once.

2.4G (On) and 5G (Off) – pressed and released the
button twice.

2.4G (Off) and 5G (Off) – pressed and released the
button three times.
WPS - When WPS function is enabled by web user
interface, press this button for more than 2 seconds. The
router will wait for any wireless client connecting to it
through WPS.
Power switch.
PWR: Connecter for a power adapter.
Connectors for local networked devices.


LAN A4-A1


A4 (PoE)

In which, LAN A4 is used for PoE connection (for indoor
LAN B
use).
Restore the default settings.
Factory
Usage: Turn on the router. Press the button and keep for
more than 10 seconds. Then the router will restart with
Reset
the factory default configuration.
3
Left LED on - The port is connected.
Left LED off - The port is disconnected.
Left LED Blinking - The data is transmitting.
Right LED on -The port is connected with
1000Mbps.
Right LED off - The port is connected with 10/100
Mbps.