Ii-3-2 Security - Draytek VigorAP 906 User Manual

II-3-2 Security

This page allows you to set security with different modes for SSID 1, 2, 3, and 4 respectively. After
configuring the correct settings, please click OK to save and invoke it.
By clicking the Security Settings, a new web page will appear so that you could configure the
settings.
Available settings are explained as follows:
Item
Mode
Description
There are several modes provided for you to choose from.
Below shows the modes with higher security;
WPA3 Personal, WPA3/WPA2 Personal, WPA2 Personal,

WPA2/WPA Personal - Accepts only WPA clients and the
encryption key should be entered in PSK. The WPA encrypts
each frame transmitted from the radio using the key, which
either PSK (Pre-Shared Key) entered manually in this field below
or automatically negotiated via 802.1x authentication.
The WPA encrypts each frame transmitted from the radio using
the key, which either PSK (Pre-Shared Key) entered manually in
this field below or automatically negotiated via 802.1x
authentication. Select WPA, WPA2, or Auto as WPA mode.
WPA3 Enterprise, WPA3/WPA2 Enterprise, WPA2 Enterprise,

WPA2/WPA Enterprise - The WPA encrypts each frame
transmitted from the radio using the key, which either PSK
(Pre-Shared Key) entered manually in this field below or
automatically negotiated via 802.1x authentication.
WPA2 Enterprise - The WPA encrypts each frame transmitted

from the radio using the key, which either PSK (Pre-Shared Key)
36